Original file

Mercedes-Benz viano 2.2CDI Bosch EDC16C31 CR3-OM646-PUBKEY-S020 / 1037372442

An original (stock) flash read of the Bosch EDC16C31 control unit, fitted in Mercedes-Benz viano 2.2CDI, hardware number CR3-OM646-PUBKEY-S020 and software number 1037372442, 1,024.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz viano 2.2CDI2.2 diesel · 110KW
Control unit
Bosch EDC16C31
Read type
Full read (boot area included)
File
1,024.00 KB · Flash
Hardware number
CR3-OM646-PUBKEY-S020
Software number
1037372442

Technical data

Vehicle
BrandMercedes-Benz
Car modelviano 2.2CDI
Engine2.2 diesel
Power110KW
Control unit
Control unitBosch EDC16C31
ECU makerBosch
Hardware numberCR3-OM646-PUBKEY-S020
Software number1037372442
File
File typeOriginal flash read
File size1,024.00 KB (1,048,576 bytes)
From the file nameMB viano edc16
File key5034ec8b75840eeb
Identification read from the file
Read typeFull read (boot area included)
ProcessorMPC555
Bosch part / software1037372442Offset in the file: 0x020010

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16C31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR3-OM646-PUBKEY-S020 and software number 1037372442. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz VaneoFlash1,024.00 KB€15Add to cart
Mercedes-Benz VianoFlash1,024.00 KB€15Add to cart
Mercedes-Benz VitoFlash1,024.00 KB€15Add to cart
Mercedes-Benz VitoFlash1,024.00 KB€15Add to cart
Mercedes-Benz Viano 2.2CDI 149.6PSFlash · From the file name: Mercedes Viano 110kW 646 6391,024.00 KB€15Add to cart

All reads of CR3-OM646-PUBKEY-S020 / 1037372442

Other pairs of Bosch EDC16C31

HardwareSoftwareVehicles
CR3-OM646-PUBKEY-S0191037376880Mercedes-Benz Vito, Mercedes-Benz VITO109, Mercedes-Benz vito 2.2CDI
CR3-OM646-PUBKEY-S0191037376887Mercedes-Benz
CR3-OM646-PUBKEY-S0191037383625Mercedes-Benz Vito, Mercedes-Benz VITO, Mercedes-Benz Viano
CR3-OM646-PUBKEY-S0201037371328Mercedes-Benz viano 2.2CDI, Mercedes-Benz Vito 115 2200, Mercedes-Benz Vito
CR3-OM646-PUBKEY-S0201037376859Mercedes-Benz Viano, Mercedes-Benz Vito, Mercedes-Benz Vito 2.2CDI
CR3-OM646-PUBKEY-S0201037379867Mercedes-Benz Vito, Mercedes-Benz Viano
CR3-OM646-PUBKEY-S0211037371329Mercedes-Benz Vito, Mercedes-Benz vito 2.2CDI
CR3-OM646-PUBKEY-S0211037376860Mercedes-Benz Vito

Bosch EDC16C31 original files

The Bosch EDC16C31 unit page