Original file

Mercedes-Benz Sprinter 2006 Turbo Diesel Bosch EDC16C31 CR30-646-C4N1-906-110kW-30-0MEF-00-DTZ-024_ME1 / 1037382208

An original (stock) flash read of the Bosch EDC16C31 control unit, fitted in Mercedes-Benz Sprinter 2006 Turbo Diesel, hardware number CR30-646-C4N1-906-110kW-30-0MEF-00-DTZ-024_ME1 and software number 1037382208, 1,024.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinter 2006 Turbo Diesel2.2 diesel · 149.6PS / 110.0kW
Control unit
Bosch EDC16C31
Read type
Full read (boot area included)
File
1,024.00 KB · Flash
Hardware number
CR30-646-C4N1-906-110kW-30-0MEF-00-DTZ-024_ME1
Software number
1037382208

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter 2006 Turbo Diesel
Engine2.2 diesel
Power149.6PS / 110.0kW
Control unit
Control unitBosch EDC16C31
ECU makerBosch
Hardware numberCR30-646-C4N1-906-110kW-30-0MEF-00-DTZ-024_ME1
Software number1037382208
File
File typeOriginal flash read
File size1,024.00 KB (1,048,576 bytes)
From the file nameMB Sprinter 2.2 CDI 2006
File keyfcf2e3c7eba00397
Identification read from the file
Read typeFull read (boot area included)
ProcessorMPC555
Bosch part / software1037382208Offset in the file: 0x020010

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16C31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR30-646-C4N1-906-110kW-30-0MEF-00-DTZ-024_ME1 and software number 1037382208. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16C31

Bosch EDC16C31 original files

The Bosch EDC16C31 unit page