Original file

Mercedes-Benz Sprinter Bosch EDC16C31 CR4_NFZ-OM642-PK-S001 / 1037386796

An original (stock) flash read of the Bosch EDC16C31 control unit, fitted in Mercedes-Benz Sprinter, hardware number CR4_NFZ-OM642-PK-S001 and software number 1037386796, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinter2.2 diesel 150PS
Control unit
Bosch EDC16C31
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
CR4_NFZ-OM642-PK-S001
Software number
1037386796

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter
Engine2.2 diesel 150PS
Power150.0PS / 110.3kW
Control unit
Control unitBosch EDC16C31
ECU makerBosch
Hardware numberCR4_NFZ-OM642-PK-S001
Software number1037386796
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keycea6416c81af8b8f
Identification read from the file
ECU nameEDC16CP31
Read typeFull read (boot area included)
ProcessorMPC563
Bosch part / software1037386796Offset in the file: 0x040010

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16C31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR4_NFZ-OM642-PK-S001 and software number 1037386796. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16C31

HardwareSoftwareVehicles
CR40-64x-75T0-906-110kW-40N-0MEF-03-IAS-001_DPF7_ME151037505811Mercedes-Benz Sprinter, Mercedes-Benz Sprinter215/315/415/515, Mercedes-Benz Sprinter 315
CR40-64x-75T0-906-110kW-43-0MEF-03-IAS-001_DPF7_ME151037505817Mercedes-Benz Sprinter
CR40-64x-75T0-906-135kW-40N-0AEF-02-IAS-001_DPF8_ME71037505819Mercedes-Benz Sprinter218/318/418/518, Mercedes-Benz Sprinter
CR40-64x-75T0-906-135kW-40N-0MEF-02-IAS-001_DPF8_ME71037505819Mercedes-Benz Sprinter218/318/418/518, Mercedes-Benz W906, Mercedes-Benz Sprinter
CR4_NFZ-OM642-PK-S0011037505811Mercedes-Benz Sprinter, Mercedes-Benz Sprinter215/315/415/515, Mercedes-Benz Sprinter218/318/418/518
CR4_NFZ-OM642-PK-S0021037386798Mercedes-Benz Sprinter, Mercedes-Benz Sprinter 318 300CDI 183.5PS
CR4_NFZ-OM642-PK-S0021037386921Mercedes-Benz 218/318/418/518, Mercedes-Benz Sprinter
CR4_NFZ-OM642-PK-S0021037393839Mercedes-Benz Sprinter, Mercedes-Benz Sprinter218/318/418/518, Mercedes-Benz Sprinter W906 3.0CDTI

Bosch EDC16C31 original files

The Bosch EDC16C31 unit page