Original file

Mercedes-Benz Sprinter Bosch EDC16C31 CR4_NFZ-OM642-PK-S002 / 1037505819

An original (stock) flash read of the Bosch EDC16C31 control unit, fitted in Mercedes-Benz Sprinter, hardware number CR4_NFZ-OM642-PK-S002 and software number 1037505819, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinterdiesel · 135KW
Control unit
Bosch EDC16C31
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
CR4_NFZ-OM642-PK-S002
Software number
1037505819

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter
Enginediesel
Displacement3.0
Power135KW
Control unit
Control unitBosch EDC16C31
ECU makerBosch
Hardware numberCR4_NFZ-OM642-PK-S002
Software number1037505819
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyfd076be881628e2e
Identification read from the file
ECU nameEDC16CP31
Read typeFull read (boot area included)
ProcessorMPC563
Bosch part / software1037505819Offset in the file: 0x040010

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16C31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR4_NFZ-OM642-PK-S002 and software number 1037505819. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

All reads of CR4_NFZ-OM642-PK-S002 / 1037505819

Other pairs of Bosch EDC16C31

HardwareSoftwareVehicles
CR4_NFZ-OM642-PK-S0021037386798Mercedes-Benz Sprinter, Mercedes-Benz Sprinter 318 300CDI 183.5PS
CR4_NFZ-OM642-PK-S0021037386921Mercedes-Benz 218/318/418/518, Mercedes-Benz Sprinter
CR4_NFZ-OM642-PK-S0021037393839Mercedes-Benz Sprinter, Mercedes-Benz Sprinter218/318/418/518, Mercedes-Benz Sprinter W906 3.0CDTI
CR4_NFZ-OM642-PK-S0021037398857Mercedes-Benz Sprinter
CR4_NFZ-OM642-PK-S0031037381130Mercedes-Benz Sprinter, Mercedes-Benz Sprinter209/309/409
CR4_NFZ-OM642-PK-S0031037381138Mercedes-Benz Sprinter
CR4_NFZ-OM642-PK-S0031037383392Mercedes-Benz
CR4_NFZ-OM642-PK-S0031037386795Mercedes-Benz Sprinter

Bosch EDC16C31 original files

The Bosch EDC16C31 unit page