Original file
Mercedes-Benz Sprinter211/311/411 Bosch EDC16C31 CR40-646-41T3-906-080KW-43-0MEF-02-IAP-004_DPF7_ME2 / 1037378687
An original (stock) flash read of the Bosch EDC16C31 control unit, fitted in Mercedes-Benz Sprinter211/311/411, hardware number CR40-646-41T3-906-080KW-43-0MEF-02-IAP-004_DPF7_ME2 and software number 1037378687, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz Sprinter211/311/4112.1 diesel 109PS
- Control unit
- Bosch EDC16C31
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- CR40-646-41T3-906-080KW-43-0MEF-02-IAP-004_DPF7_ME2
- Software number
- 1037378687
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | Sprinter211/311/411 |
| Engine | 2.1 diesel 109PS |
| Power | 109PS / 80.2kW |
| Control unit | Bosch EDC16C31 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR40-646-41T3-906-080KW-43-0MEF-02-IAP-004_DPF7_ME2 |
| Software number | 1037378687 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| From the file name | MB Sprinter211 311 411 W901 |
| File key | ce54e25683a3db2d |
| Read type | Calibration only (data set) | |
|---|---|---|
| Bosch part / software | 1037378687 | Offset in the file: 0x180010 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC16C31 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR40-646-41T3-906-080KW-43-0MEF-02-IAP-004_DPF7_ME2 and software number 1037378687. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC16C31
| Hardware | Software | Vehicles |
|---|---|---|
| CR30-648-D2M1-220-ME0403-001 | 1037367141 | Mercedes-Benz S320 |
| CR30-648-D2M1-S211-ME0403-001 | 1037367142 | Mercedes-Benz E 320CDI 2004 Turbodiesel, Mercedes-Benz E, Mercedes-Benz E-Class |
| CR30-648-D2M1-S211-ME3503-002 | 1037369284 | Mercedes-Benz E |
| CR40-646-41T3-906-065KW-40-0MEF-02-IAP-004_DPF7_ME2 | 1037378690 | Mercedes-Benz Sprinter |
| CR40-646-70T3-906-065KW-40-0MEF-03-IAG-001_DPF7_ME7 | 1037383393 | Mercedes-Benz Sprinter, Mercedes-Benz Sprinter 311 2.2CDI |
| CR40-646-70T3-906-080KW-40-0MEF-03-IAG-001_DPF7_ME7 | 1037383392 | Mercedes-Benz Sprinter, Mercedes-Benz SprinterW906) |
| CR40-64X-12Q0-GW461-135KW-BA4_6_10-EURO4-DPF-2407X020_ME3 | 1037391305 | Mercedes-Benz G280/300 |
| CR40-64X-21R2-T1N-80KW-TSG330-EURO4_OP_T4-006_ME05 | 1037529309 | Mercedes-Benz Sprinter W909 |