Original file

Mercedes-Benz Sprinter 220CDI 2007 Turbodiesel Bosch EDC16C31 CR40-64x-65T2-906-095KW-40-0MEF-08-DAS-000_DPF7_ME6 / 1037383385

An original (stock) flash read of the Bosch EDC16C31 control unit, fitted in Mercedes-Benz Sprinter 220CDI 2007 Turbodiesel, hardware number CR40-64x-65T2-906-095KW-40-0MEF-08-DAS-000_DPF7_ME6 and software number 1037383385, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinter 220CDI 2007 Turbodieseldiesel 095KW
Control unit
Bosch EDC16C31
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CR40-64x-65T2-906-095KW-40-0MEF-08-DAS-000_DPF7_ME6
Software number
1037383385

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter 220CDI 2007 Turbodiesel
Enginediesel 095KW
Displacement2.2
Control unit
Control unitBosch EDC16C31
ECU makerBosch
Hardware numberCR40-64x-65T2-906-095KW-40-0MEF-08-DAS-000_DPF7_ME6
Software number1037383385
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameMB Sprinter 220CDI 2007 Turbodiesel
File keycb32e465ac97cdd7
Identification read from the file
Read typeCalibration only (data set)
Bosch part / software1037383385Offset in the file: 0x180010

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16C31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR40-64x-65T2-906-095KW-40-0MEF-08-DAS-000_DPF7_ME6 and software number 1037383385. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16C31

HardwareSoftwareVehicles
CR40-64x-65T2-906-065KW-40-0MEF-05-IAP-000_DPF7_ME51037381131Mercedes-Benz Sprinter
CR40-64x-65T2-906-065KW-40-0MEF-05-IAP-000_DPF7_ME51037381139Mercedes-Benz Sprinter219/319/419/519
CR40-64x-65T2-906-080KW-40-0MEF-05-IAP-000_DPF7_ME51037381130Mercedes-Benz Sprinter211/311/411/511, Mercedes-Benz Sprinter, Mercedes-Benz Sprinter 2004 Turbodiesel 80KWKW
CR40-64x-65T2-906-080KW-43-0MEF-05-IAP-000_DPF7_ME51037381128Mercedes-Benz Sprinter
CR40-64x-65T2-906-110KW-40-0MEF-06-DAS-000_DPF7_ME51037381129Mercedes-Benz Sprinter
CR40-64x-65T2-906-135KW-40-0MEF-02-ATZ-002_8_DPF_ME11037381134Mercedes-Benz Sprinter, Mercedes-Benz Sprinter218/318/418/518
CR40-64x-70T2-639-070kW-43O-0MEF-02-RFV-001_ME11037383369Mercedes-Benz Vito 220 2004 89.7KWKW, Mercedes-Benz VITO109, Mercedes-Benz Vito
CR40-64x-70T2-639-085kW-43O-0MEF-02-RFV-001_ME11037383370Mercedes-Benz Vito 2006 Turbo Diesel, Mercedes-Benz Vito

Bosch EDC16C31 original files

The Bosch EDC16C31 unit page