Original file

Mercedes-Benz VITO115 Bosch EDC16C31 CR40-64x-70T2-639-110kW-43O-0MEF-02-RFV-001_ME1 / 1037383371

An original (stock) flash read of the Bosch EDC16C31 control unit, fitted in Mercedes-Benz VITO115, hardware number CR40-64x-70T2-639-110kW-43O-0MEF-02-RFV-001_ME1 and software number 1037383371, 512.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz VITO1152.2 110KW
Control unit
Bosch EDC16C31
Read type
Calibration only (data set)
File
512.00 KB · Flash
Hardware number
CR40-64x-70T2-639-110kW-43O-0MEF-02-RFV-001_ME1
Software number
1037383371

Technical data

Vehicle
BrandMercedes-Benz
Car modelVITO115
Engine2.2 110KW
FuelDiesel
Control unit
Control unitBosch EDC16C31
ECU makerBosch
Hardware numberCR40-64x-70T2-639-110kW-43O-0MEF-02-RFV-001_ME1
Software number1037383371
File
File typeOriginal flash read
File size512.00 KB (524,288 bytes)
File key1a8853c17e5a7708
Identification read from the file
Read typeCalibration only (data set)
Bosch part / software1037383371Offset in the file: 0x000010

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16C31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR40-64x-70T2-639-110kW-43O-0MEF-02-RFV-001_ME1 and software number 1037383371. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz VianoFlash2,048.00 KB€15Add to cart
Mercedes-Benz VianoFlash512.00 KB€15Add to cart

All reads of CR40-64x-70T2-639-110kW-43O-0MEF-02-RFV-001_ME1 / 1037383371

Other pairs of Bosch EDC16C31

HardwareSoftwareVehicles
CR40-64x-65T2-906-135KW-40-0MEF-02-ATZ-002_8_DPF_ME11037381134Mercedes-Benz Sprinter, Mercedes-Benz Sprinter218/318/418/518
CR40-64x-70T2-639-070kW-43O-0MEF-02-RFV-001_ME11037383369Mercedes-Benz Vito 220 2004 89.7KWKW, Mercedes-Benz VITO109, Mercedes-Benz Vito
CR40-64x-70T2-639-085kW-43O-0MEF-02-RFV-001_ME11037383370Mercedes-Benz Vito 2006 Turbo Diesel, Mercedes-Benz Vito
CR40-64x-70T2-639-085kW-43P-0MEF-02-RFV-001_ME11037383373Mercedes-Benz Vito
CR40-64x-70T2-639-110kW-43P-0MEF-02-RFV-001_ME11037383374Mercedes-Benz Vito, Mercedes-Benz VITO115
CR40-64x-70T3-639-150KW-43-0AEF-03-ATZ-001_ME41037383394Mercedes-Benz Vito 2005 Turbodiesel KW, Mercedes-Benz Vito 300 2007 Turbodiesel, Mercedes-Benz Viano
CR40-64x-70T3-906-110KW-40-0MEF-03-IAG-001_DPF7_ME71037383390Mercedes-Benz Sprinter215/315/415/515
CR40-64x-70T3-906-135kW-40-0MEF-03-DAG-001_8_DPF_ME21037383395Mercedes-Benz Sprinter219/319/419/519, Mercedes-Benz Sprinter

Bosch EDC16C31 original files

The Bosch EDC16C31 unit page