Original file

Mercedes-Benz Sprinter209/309/409 Bosch EDC16C31 CR40-64x-70T5-906-065kW-40N-0MEF-01-IAS-003_DPF7_ME10 / 1037398855

An original (stock) flash read of the Bosch EDC16C31 control unit, fitted in Mercedes-Benz Sprinter209/309/409, hardware number CR40-64x-70T5-906-065kW-40N-0MEF-01-IAS-003_DPF7_ME10 and software number 1037398855, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinter209/309/4092.1 diesel 065KW
Control unit
Bosch EDC16C31
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CR40-64x-70T5-906-065kW-40N-0MEF-01-IAS-003_DPF7_ME10
Software number
1037398855

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter209/309/409
Engine2.1 diesel 065KW
Control unit
Control unitBosch EDC16C31
ECU makerBosch
Hardware numberCR40-64x-70T5-906-065kW-40N-0MEF-01-IAS-003_DPF7_ME10
Software number1037398855
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyf47b6ac400aadf2f
Identification read from the file
Read typeCalibration only (data set)
Bosch part / software1037398855Offset in the file: 0x180010

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16C31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR40-64x-70T5-906-065kW-40N-0MEF-01-IAS-003_DPF7_ME10 and software number 1037398855. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16C31

HardwareSoftwareVehicles
CR40-64x-70T5-639-150kW-43-0AEF-03-IAS-003_ME71037393814Mercedes-Benz Vito, Mercedes-Benz VITO120, Mercedes-Benz Vito 220 2002 Turbodiesel
CR40-64x-70T5-906-065kW-40-0MEF-01-IAG-002_DPF7_ME91037386782Mercedes-Benz Sprinter, Mercedes-Benz Vito 2006 Turbo Diesel, Mercedes-Benz Sprinter209/309/409
CR40-64x-70T5-906-065kW-40N-0MEF-01-IAG-002_DPF7_ME91037386903Mercedes-Benz Sprinter209/309/409, Mercedes-Benz Sprinter
CR40-64x-70T5-906-065kW-40N-0MEF-01-IAS-003_DPF7_ME101037391214Mercedes-Benz Sprinter, Mercedes-Benz Sprinter209/309/409
CR40-64x-70T5-906-080kW-40-0MEF-01-IAG-002_DPF7_ME91037386795Mercedes-Benz Vito, Mercedes-Benz Sprinter211/311/411/511, Mercedes-Benz Sprinter208/308/408
CR40-64x-70T5-906-080kW-40N-0AEF-01-IAS-003_DPF7_ME101037391213Mercedes-Benz Sprinter
CR40-64x-70T5-906-080kW-40N-0MEF-01-IAG-002_DPF7_ME91037386902Mercedes-Benz Sprinter211/311/411/511, Mercedes-Benz Sprinter, Mercedes-Benz Sprinter211/311/411
CR40-64x-70T5-906-080kW-40N-0MEF-01-IAS-003_DPF7_ME101037391213Mercedes-Benz Sprinter, Mercedes-Benz Sprinter211/311/411/511, Mercedes-Benz Sprinter208/308/408

Bosch EDC16C31 original files

The Bosch EDC16C31 unit page