Original file

Mercedes-Benz Bosch EDC16C31 CR40-64x-70T5-906-080kW-40N-0MEF-01-IAS-003_DPF7_ME10 / 1037391213

An original (stock) flash read of the Bosch EDC16C31 control unit, fitted in Mercedes-Benz, hardware number CR40-64x-70T5-906-080kW-40N-0MEF-01-IAS-003_DPF7_ME10 and software number 1037391213, 512.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz080KW
Control unit
Bosch EDC16C31
Read type
Calibration only (data set)
File
512.00 KB · Flash
Hardware number
CR40-64x-70T5-906-080kW-40N-0MEF-01-IAS-003_DPF7_ME10
Software number
1037391213

Technical data

Vehicle
BrandMercedes-Benz
Engine080KW
FuelDiesel
Displacement2.1
Control unit
Control unitBosch EDC16C31
ECU makerBosch
Hardware numberCR40-64x-70T5-906-080kW-40N-0MEF-01-IAS-003_DPF7_ME10
Software number1037391213
File
File typeOriginal flash read
File size512.00 KB (524,288 bytes)
File key7ea167bc0756cf91
Identification read from the file
Read typeCalibration only (data set)
Bosch part / software1037391213Offset in the file: 0x000010

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16C31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR40-64x-70T5-906-080kW-40N-0MEF-01-IAS-003_DPF7_ME10 and software number 1037391213. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

All reads of CR40-64x-70T5-906-080kW-40N-0MEF-01-IAS-003_DPF7_ME10 / 1037391213

Other pairs of Bosch EDC16C31

HardwareSoftwareVehicles
CR40-64x-70T5-906-065kW-40N-0MEF-01-IAS-003_DPF7_ME101037398855Mercedes-Benz Sprinter209/309/409
CR40-64x-70T5-906-080kW-40-0MEF-01-IAG-002_DPF7_ME91037386795Mercedes-Benz Vito, Mercedes-Benz Sprinter211/311/411/511, Mercedes-Benz Sprinter208/308/408
CR40-64x-70T5-906-080kW-40N-0AEF-01-IAS-003_DPF7_ME101037391213Mercedes-Benz Sprinter
CR40-64x-70T5-906-080kW-40N-0MEF-01-IAG-002_DPF7_ME91037386902Mercedes-Benz Sprinter211/311/411/511, Mercedes-Benz Sprinter, Mercedes-Benz Sprinter211/311/411
CR40-64x-70T5-906-080kW-40N-0MEF-01-IAS-003_DPF7_ME101037398854Mercedes-Benz Sprinter, Mercedes-Benz Sprinter211/311/411/511
CR40-64x-70T5-906-080kW-43-0MEF-01-IAS-003_DPF7_ME101037396547Mercedes-Benz Sprinter, Mercedes-Benz Vito
CR40-64x-70T5-906-095kW-40N-0MEF-01-IAS-003_DPF7_ME101037391212Mercedes-Benz Sprinter, Mercedes-Benz Sprinter213/313
CR40-64x-70T5-906-110kW-40N-0MEF-01-IAG-002_DPF7_ME91037386900Mercedes-Benz Sprinter

Bosch EDC16C31 original files

The Bosch EDC16C31 unit page