Original file

Mercedes-Benz Sprinter Bosch EDC16C31 CR40-64X-70T5-906-135KW-40N-0MEF-01-DAE-001_DPF12_ME3 / 1037386921

An original (stock) flash read of the Bosch EDC16C31 control unit, fitted in Mercedes-Benz Sprinter, hardware number CR40-64X-70T5-906-135KW-40N-0MEF-01-DAE-001_DPF12_ME3 and software number 1037386921, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinter3.0 diesel 184PS
Control unit
Bosch EDC16C31
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
CR40-64X-70T5-906-135KW-40N-0MEF-01-DAE-001_DPF12_ME3
Software number
1037386921

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter
Engine3.0 diesel 184PS
Power184.0PS / 135.3kW
Control unit
Control unitBosch EDC16C31
ECU makerBosch
Hardware numberCR40-64X-70T5-906-135KW-40N-0MEF-01-DAE-001_DPF12_ME3
Software number1037386921
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key3e5ced8d2efe787c
Identification read from the file
Read typeOBD read (no boot area)
Bosch part / software1037386921Offset in the file: 0x160010

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16C31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR40-64X-70T5-906-135KW-40N-0MEF-01-DAE-001_DPF12_ME3 and software number 1037386921. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16C31

HardwareSoftwareVehicles
CR40-64X-70T5-906-110KW-40N-0MEF-02-IAS-001_DPF7_ME111037400338Mercedes-Benz vito 2.2CDI, Mercedes-Benz Sprinter W906) 311 2200, Mercedes-Benz Sprinter
CR40-64X-70T5-906-110KW-43-0MEF-01-IAS-003_DPF7_ME101037391215Mercedes-Benz Sprinter
CR40-64X-70T5-906-110KW-43-0MEF-01-IAS-003_DPF7_ME101037396546Mercedes-Benz Sprinter W906) 315 2200, Mercedes-Benz Vito, Mercedes-Benz Sprinter
CR40-64X-70T5-906-135KW-40-0MEF-01-DAG-001_DPF8_ME31037386798Mercedes-Benz Sprinter, Mercedes-Benz Sprinter W906) 318 3000
CR40-64X-70T5-906-135KW-40N-0MEF-01-DAE-001_DPF8_ME31037386921Mercedes-Benz Sprinter, Mercedes-Benz Sprinter 906 3.0CDI
CR40-64X-70T5-906-135KW-40N-0MEF-01-IAS-002_DPF8_ME41037391297Mercedes-Benz Sprinter, Mercedes-Benz Sprinter316
CR40-64X-70T5-906-135KW-40N-0MEF-02-IAS-003_DPF8_ME51037393839Mercedes-Benz Sprinter, Mercedes-Benz Sprinter218/318/418/518
CR40-64X-70T5-906-135KW-40N-0MEF-02-IAS-003_DPF8_ME51037398857Mercedes-Benz Sprinter218/318/418/518, Mercedes-Benz Sprinter

Bosch EDC16C31 original files

The Bosch EDC16C31 unit page