Original file

Mercedes-Benz Sprinter216/316/416 Bosch EDC16C31 CR40-64X-75T0-906-110KW-43-0MEF-03-IAS-001_DPF7_ME15 / 1037505817

An original (stock) flash read of the Bosch EDC16C31 control unit, fitted in Mercedes-Benz Sprinter216/316/416, hardware number CR40-64X-75T0-906-110KW-43-0MEF-03-IAS-001_DPF7_ME15 and software number 1037505817, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinter216/316/416110KW
Control unit
Bosch EDC16C31
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CR40-64X-75T0-906-110KW-43-0MEF-03-IAS-001_DPF7_ME15
Software number
1037505817

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter216/316/416
Engine110KW
FuelPetrol
Displacement2.1
Control unit
Control unitBosch EDC16C31
ECU makerBosch
Hardware numberCR40-64X-75T0-906-110KW-43-0MEF-03-IAS-001_DPF7_ME15
Software number1037505817
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keye52d82c482ec3821
Identification read from the file
Read typeCalibration only (data set)
Bosch part / software1037505817Offset in the file: 0x180010

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16C31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR40-64X-75T0-906-110KW-43-0MEF-03-IAS-001_DPF7_ME15 and software number 1037505817. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz SprinterW906)Flash · From the file name: Mercedes SprinterW906 EDC16CP312,048.00 KB€15Add to cart
Mercedes-BenzFlash · From the file name: L533CC02,048.00 KB€15Add to cart
Mercedes-Benz Sprinter W 906 2.2CDIFlash · From the file name: Mercedes Sprinter 906 110kW 432,048.00 KB€15Add to cart
Mercedes-Benz SprinterFlash2,048.00 KB€15Add to cart

All reads of CR40-64X-75T0-906-110KW-43-0MEF-03-IAS-001_DPF7_ME15 / 1037505817

Other pairs of Bosch EDC16C31

HardwareSoftwareVehicles
CR40-64X-75T0-906-095KW-40N-0MEF-04-IAS-001_DPF7_ME161037505836Mercedes-Benz Sprinter, Mercedes-Benz Vito
CR40-64X-75T0-906-095KW-40N-0MEF-04-IAS-001_DPF7_ME161037505841Mercedes-Benz Sprinter216/316
CR40-64X-75T0-906-110KW-40N-0MEF-03-IAS-001_DPF10_ME151037505811Mercedes-Benz Sprinter
CR40-64X-75T0-906-110KW-40N-0MEF-03-IAS-001_DPF7_ME151037505811Mercedes-Benz Sprinter, Mercedes-Benz Sprinter W906) 209 2200, Mercedes-Benz Sprinter215/315/415/515
CR40-64X-75T0-906-135KW-40N-0MEF-02-IAS-001_DPF12_ME71037505819Mercedes-Benz Sprinter
CR40-64X-75T0-906-135KW-40N-0MEF-02-IAS-001_DPF8_ME71037505819Mercedes-Benz Sprinter, Mercedes-Benz Sprinter218/318/418/518
CR40-64x-12Q0-GW461-135kW-BA4_6_10-EU43-DPF-0508x025_ME21037396541Mercedes-Benz G 320 2006 Turbo
CR40-64x-65T2-639-150KW-43-0AEF-03-ATZ-001_ME31037381147Mercedes-Benz Viano, Mercedes-Benz Vito 2007 Turbodiesel 150KWKW

Bosch EDC16C31 original files

The Bosch EDC16C31 unit page