Original file

Mercedes-Benz W906 Bosch EDC16C31 CR40-64x-75T0-906-135kW-40N-0MEF-02-IAS-001_DPF8_ME7 / 1037505819

An original (stock) flash read of the Bosch EDC16C31 control unit, fitted in Mercedes-Benz W906, hardware number CR40-64x-75T0-906-135kW-40N-0MEF-02-IAS-001_DPF8_ME7 and software number 1037505819, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz W9063.0 diesel 135KW
Control unit
Bosch EDC16C31
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CR40-64x-75T0-906-135kW-40N-0MEF-02-IAS-001_DPF8_ME7
Software number
1037505819

Technical data

Vehicle
BrandMercedes-Benz
Car modelW906
Engine3.0 diesel 135KW
Control unit
Control unitBosch EDC16C31
ECU makerBosch
Hardware numberCR40-64x-75T0-906-135kW-40N-0MEF-02-IAS-001_DPF8_ME7
Software number1037505819
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key2bd601d0763d28eb
Identification read from the file
Read typeCalibration only (data set)
Bosch part / software1037505819Offset in the file: 0x180010

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16C31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR40-64x-75T0-906-135kW-40N-0MEF-02-IAS-001_DPF8_ME7 and software number 1037505819. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz Sprinter218/318/418/518Flash512.00 KB€15Add to cart
Mercedes-Benz Sprinter218/318/418/518Flash2,048.00 KB€15Add to cart
Mercedes-Benz SprinterFlash2,048.00 KB€15Add to cart

All reads of CR40-64x-75T0-906-135kW-40N-0MEF-02-IAS-001_DPF8_ME7 / 1037505819

Other pairs of Bosch EDC16C31

HardwareSoftwareVehicles
CR40-64x-75T0-906-110kW-40N-0AEF-03-IAS-001_DPF7_ME151037505811Mercedes-Benz Sprinter215/315/415/515
CR40-64x-75T0-906-110kW-40N-0MEF-03-IAS-001_DPF7_ME151037505811Mercedes-Benz Sprinter, Mercedes-Benz Sprinter215/315/415/515, Mercedes-Benz Sprinter 315
CR40-64x-75T0-906-110kW-43-0MEF-03-IAS-001_DPF7_ME151037505817Mercedes-Benz Sprinter
CR40-64x-75T0-906-135kW-40N-0AEF-02-IAS-001_DPF8_ME71037505819Mercedes-Benz Sprinter218/318/418/518, Mercedes-Benz Sprinter
CR4_NFZ-OM642-PK-S0011037386796Mercedes-Benz Sprinter
CR4_NFZ-OM642-PK-S0011037505811Mercedes-Benz Sprinter, Mercedes-Benz Sprinter215/315/415/515, Mercedes-Benz Sprinter218/318/418/518
CR4_NFZ-OM642-PK-S0021037386798Mercedes-Benz Sprinter, Mercedes-Benz Sprinter 318 300CDI 183.5PS
CR4_NFZ-OM642-PK-S0021037386921Mercedes-Benz 218/318/418/518, Mercedes-Benz Sprinter

Bosch EDC16C31 original files

The Bosch EDC16C31 unit page