Original file

Smart Bosch EDC16C31 CRAS-660EU5-31B1-451-40KW-EU5_OP-018_ME212400 / 10SW081230

An original (stock) flash read of the Bosch EDC16C31 control unit, fitted in Smart, hardware number CRAS-660EU5-31B1-451-40KW-EU5_OP-018_ME212400 and software number 10SW081230, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Smart0.8 diesel 41PS
Control unit
Bosch EDC16C31
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CRAS-660EU5-31B1-451-40KW-EU5_OP-018_ME212400
Software number
10SW081230

Technical data

Vehicle
BrandSmart
Engine0.8 diesel 41PS
Power41.0PS / 30.2kW
Control unit
Control unitBosch EDC16C31
ECU makerBosch
Hardware numberCRAS-660EU5-31B1-451-40KW-EU5_OP-018_ME212400
Software number10SW081230
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key3b5d494db4db67b6
Identification read from the file
Read typeCalibration only (data set)
Bosch part / software10SW081230Offset in the file: 0x1A0010

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16C31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CRAS-660EU5-31B1-451-40KW-EU5_OP-018_ME212400 and software number 10SW081230. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Smart ForTwoFlash2,048.00 KB€15Add to cart

All reads of CRAS-660EU5-31B1-451-40KW-EU5_OP-018_ME212400 / 10SW081230

Other pairs of Bosch EDC16C31

Bosch EDC16C31 original files

The Bosch EDC16C31 unit page