Original file

Mercedes-Benz A Bosch EDC16C32 CRAx-640-C5A2-169WM-103kW-EU4-011_001_ME_1506x800 / 1037381146

An original (stock) flash read of the Bosch EDC16C32 control unit, fitted in Mercedes-Benz A, hardware number CRAx-640-C5A2-169WM-103kW-EU4-011_001_ME_1506x800 and software number 1037381146, 256.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz A2.0 diesel 140PS
Control unit
Bosch EDC16C32
Read type
Calibration only (data set)
File
256.00 KB · Flash
Hardware number
CRAx-640-C5A2-169WM-103kW-EU4-011_001_ME_1506x800
Software number
1037381146

Technical data

Vehicle
BrandMercedes-Benz
Car modelA
Engine2.0 diesel 140PS
Power140PS / 103.0kW
Control unit
Control unitBosch EDC16C32
ECU makerBosch
Hardware numberCRAx-640-C5A2-169WM-103kW-EU4-011_001_ME_1506x800
Software number1037381146
File
File typeOriginal flash read
File size256.00 KB (262,144 bytes)
File keydc3cc7024c2c4da4
Identification read from the file
Read typeCalibration only (data set)
Bosch part / software1037381146Offset in the file: 0x000010

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16C32 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CRAx-640-C5A2-169WM-103kW-EU4-011_001_ME_1506x800 and software number 1037381146. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16C32

Bosch EDC16C32 original files

The Bosch EDC16C32 unit page