Original file

BMW x3 Bosch EDC16C35 0281013050 / 1037383755

An original (stock) flash read of the Bosch EDC16C35 control unit, fitted in BMW x3, hardware number 0281013050 and software number 1037383755, 2,056.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW x32.0 150PS
Control unit
Bosch EDC16C35
Read type
Full read (boot area included)
File
2,056.00 KB · Flash
Hardware number
0281013050
Software number
1037383755
Vehicle maker's hardware number
7805349

Technical data

Vehicle
BrandBMW
Car modelx3
Engine2.0 150PS
Power150.0PS / 110.3kW
Control unit
Control unitBosch EDC16C35
ECU makerBosch
Hardware number0281013050
Software number1037383755
File
File typeOriginal flash read
File size2,056.00 KB (2,105,344 bytes)
File key602929955bf5462f
Identification read from the file
ECU nameEDC16C35
Read typeFull read (boot area included)
ProcessorMPC562
Bosch part / software0281013050 / 1037383755Offset in the file: 0x008000 / 0x040010
Vehicle maker's hardware number7805349Offset in the file: 0x01047E

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16C35 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281013050 and software number 1037383755. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16C35

HardwareSoftwareVehicles
02810129941037390010BMW E90/E91/ E92/E93
02810129941037390904BMW E90/E91, BMW E90/E91/ E92/E93
02810129941037500774BMW E90/E91/ E92/E93 3.0d, BMW 3er, BMW 3 Serie
02810130501037377736BMW x3, BMW E83, BMW X3 2.0D
02810130501037389882BMW X3
02810130521037376969BMW 3er 330D, BMW E90/E91/ E92/E93 3.0d
02810130521037377760BMW X3 X3-3.0D, BMW E83 3.0d 2005 Turbo, BMW x3
02810130521037387658BMW E83, BMW 3er, BMW X3

Bosch EDC16C35 original files

The Bosch EDC16C35 unit page