Original file

Fiat Doblo Bosch EDC16C39 0281017012 / 1037521598

An original (stock) flash read of the Bosch EDC16C39 control unit, fitted in Fiat Doblo, hardware number 0281017012 and software number 1037521598, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat Doblo1.6 diesel 105PS
Control unit
Bosch EDC16C39
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
0281017012
Software number
1037521598

Technical data

Vehicle
BrandFiat
Car modelDoblo
Engine1.6 diesel 105PS
Power105.0PS / 77.2kW
Control unit
Control unitBosch EDC16C39
ECU makerBosch
Hardware number0281017012
Software number1037521598
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key193daf26353e299b
Identification read from the file
ECU nameEDC16C39
Read typeFull read (boot area included)
ProcessorMPC561
Bosch part / software0281017012 / 1037521598Offset in the file: 0x02FA5B / 0x030010
Bosch project identifier (EPK)99/1/EDC16C39/009/456Offset in the file: 0x1B0720

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16C39 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281017012 and software number 1037521598. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16C39

HardwareSoftwareVehicles
02810170091037514051Fiat Doblo
02810170121037504028Fiat Doblo, Fiat doblo
02810170121037506393Fiat Doblo
02810170121037514046Fiat Doblo
0281017012521598Fiat Doblo
02810170131037514049Fiat Doblo
02810170641037505798Opel Zafira, Opel Astra, Opel vectra 1.9cdti
02810172991037507410Fiat

Bosch EDC16C39 original files

The Bosch EDC16C39 unit page