Original file

Fiat Doblo Bosch EDC16C39 0281018691 / 519580

An original (stock) flash read of the Bosch EDC16C39 control unit, fitted in Fiat Doblo, hardware number 0281018691 and software number 519580, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat Doblo
Control unit
Bosch EDC16C39
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
0281018691
Software number
519580
Bosch part / software
1037519580

Technical data

Vehicle
BrandFiat
Car modelDoblo
Control unit
Control unitBosch EDC16C39
ECU makerBosch
Hardware number0281018691
Software number519580
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameFiat SW version HW Doblo
File keyd077770d8655dc7e
Identification read from the file
ECU nameEDC16C39
Read typeFull read (boot area included)
ProcessorMPC561
Bosch part / software0281018691 / 1037519580Offset in the file: 0x02FA5B / 0x030010
Bosch project identifier (EPK)99/1/EDC16C39/009/456Offset in the file: 0x1B0720

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16C39 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281018691 and software number 519580. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16C39

HardwareSoftwareVehicles
02810183151037519569Opel Combo, Opel Doblo 1.6L, Fiat
02810183161037518683Fiat Doblo
02810185961037513351Chevrolet s10
02810186911037526905Fiat Doblo
0281018693524789Fiat Doblo
02810186981037519561Fiat Doblo
02810186991037519577Fiat Doblo
02810187021037519579Opel Combo

Bosch EDC16C39 original files

The Bosch EDC16C39 unit page