Original file

Hyundai Getz Bosch EDC16C39 39104-2A510 / 1037383175

An original (stock) flash read of the Bosch EDC16C39 control unit, fitted in Hyundai Getz, hardware number 39104-2A510 and software number 1037383175, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Hyundai Getz1.5 diesel 74PS
Control unit
Bosch EDC16C39
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
39104-2A510
Software number
1037383175

Technical data

Vehicle
BrandHyundai
Car modelGetz
Engine1.5 diesel 74PS
Power74.8PS / 55.0kW
Control unit
Control unitBosch EDC16C39
ECU makerBosch
Hardware number39104-2A510
Software number1037383175
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameHyundai Getz 1.5 CRDi R3
File keydb83cddb43899cbd
Identification read from the file
ECU nameEDC16C39
Read typeCalibration only (data set)
Bosch part / software1037383175Offset in the file: 0x1C0010
Bosch project identifier (EPK)99/1/EDC16C39/147/D373Offset in the file: 0x1C0608

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16C39 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 39104-2A510 and software number 1037383175. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16C39

HardwareSoftwareVehicles
39103-2A7651037510027Kia Ceed
39103-2A7651037514129Kia cee`d, Kia Proceed
39103-2A7751037394268Kia cee`d, Kia Ceed
39103-2A7781037501523Kia cee`d, Kia Cee'd
39104-2A7101037390062Hyundai i30
39104-4A2001037388090Kia Starex
39104-4A2071037502428Kia Starex, Hyundai
39104-4A2101037388091Kia Starex

Bosch EDC16C39 original files

The Bosch EDC16C39 unit page