Original file

Hyundai i30 2008y Bosch EDC16C39 39106-2A710 / 1037391412

An original (stock) flash read of the Bosch EDC16C39 control unit, fitted in Hyundai i30 2008y, hardware number 39106-2A710 and software number 1037391412, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Hyundai i30 2008y1.6 diesel
Control unit
Bosch EDC16C39
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
39106-2A710
Software number
1037391412

Technical data

Vehicle
BrandHyundai
Car modeli30 2008y
Engine1.6 diesel
Control unit
Control unitBosch EDC16C39
ECU makerBosch
Hardware number39106-2A710
Software number1037391412
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameHyundai i30 1.6 CRDi 2008y
File keycb26e9efd5e4ba26
Identification read from the file
ECU nameEDC16C39
Read typeCalibration only (data set)
Bosch part / software1037391412Offset in the file: 0x1C0010
Bosch project identifier (EPK)99/1/EDC16C39/147/D373Offset in the file: 0x1C0608

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16C39 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 39106-2A710 and software number 1037391412. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16C39

HardwareSoftwareVehicles
39105-2A7621037395984Hyundai i30
39105-2A7651037393044Hyundai i30
39105-2A7661037395819Hyundai i30
39106-2A7101037390066Hyundai i30, Hyundai ix35/Tucson
39106-2A7101037391496Hyundai I30, Hyundai i30 2007 Turbodiesel 84.6KWKW, Kia
39106-2A7121037395817Hyundai i30
39106-2A713E3FHCM2EI11U1037509566Hyundai i30
39106-2A7151037390067Hyundai I30, Hyundai I30 1600CRDiDPF, Hyundai i30

Bosch EDC16C39 original files

The Bosch EDC16C39 unit page