Original file

Fiat Ducato II Typ244 Bosch EDC16C39 51799349 / 1037386377

An original (stock) flash read of the Bosch EDC16C39 control unit, fitted in Fiat Ducato II Typ244, hardware number 51799349 and software number 1037386377, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat Ducato II Typ2442.3 diesel 120PS
Control unit
Bosch EDC16C39
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
51799349
Software number
1037386377

Technical data

Vehicle
BrandFiat
Car modelDucato II Typ244
Engine2.3 diesel 120PS
Power120.0PS / 88.3kW
Control unit
Control unitBosch EDC16C39
ECU makerBosch
Hardware number51799349
Software number1037386377
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key6df25fae22a61f60
Identification read from the file
ECU nameEDC16C39
Read typeOBD read (no boot area)
Bosch part / software1037386377Offset in the file: 0x180010
Bosch project identifier (EPK)99/1/EDC16C39/009/C427Offset in the file: 0x1C05B4

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16C39 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 51799349 and software number 1037386377. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16C39

HardwareSoftwareVehicles
517988171037384357Fiat Doblo 2008 Turbodiesel 84.6KWKW
517988181037383488Fiat Doblo
517988191037383489Fiat Doblo
51798819383489Fiat Doblo
517993501037390173Fiat Ducato
517993511037386378Fiat ducato 2.3JTD, Fiat Ducato, Fiat Eden
517993531037386379Fiat Ducato, Fiat Jumper, Citroën
517994431037383685Fiat Croma

Bosch EDC16C39 original files

The Bosch EDC16C39 unit page