Original file
Fiat MULTIPLA Bosch EDC16C39 51869773 / 502683
An original (stock) flash read of the Bosch EDC16C39 control unit, fitted in Fiat MULTIPLA, hardware number 51869773 and software number 502683, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Fiat MULTIPLA
- Control unit
- Bosch EDC16C39
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- 51869773
- Software number
- 502683
- Bosch part / software
- 1037502683
Technical data
| Brand | Fiat |
|---|---|
| Car model | MULTIPLA |
| Control unit | Bosch EDC16C39 |
|---|---|
| ECU maker | Bosch |
| Hardware number | 51869773 |
| Software number | 502683 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| From the file name | Fiat SW version HW MULTIPLA |
| File key | ca38e8048c3dd6d9 |
| ECU name | EDC16C39 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 1037502683 | Offset in the file: 0x1C0010 |
| Bosch project identifier (EPK) | 99/1/EDC16C39/009/C456 | Offset in the file: 0x1C05FC |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC16C39 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 51869773 and software number 502683. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC16C39
| Hardware | Software | Vehicles |
|---|---|---|
| 51865263 | 1037501121 | Alfa Romeo Mito |
| 51865264 | 1037501122 | Alfa Romeo Mito |
| 51868765 | 1037501123 | Fiat Croma |
| 51868768 | 1037502681 | Fiat Bravo 1900, Fiat Croma |
| 51871187 | 1037502686 | Fiat Bravo |
| 51871187 | 502686 | Fiat BRAVO |
| 51871189 | 1037502699 | Fiat Bravo |
| 51873210 | 1037504028 | Fiat Doblo |