Original file

Opel Vectra Bosch EDC16C9 0281011914 / 1037502502

An original (stock) flash read of the Bosch EDC16C9 control unit, fitted in Opel Vectra, hardware number 0281011914 and software number 1037502502, 1,024.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Opel Vectra1.9 diesel · 120.0PS / 88.3kW
Control unit
Bosch EDC16C9
Read type
Full read (boot area included)
File
1,024.00 KB · Flash
Hardware number
0281011914
Software number
1037502502

Technical data

Vehicle
BrandOpel
Car modelVectra
Engine1.9 diesel
Power120.0PS / 88.3kW
Control unit
Control unitBosch EDC16C9
ECU makerBosch
Hardware number0281011914
Software number1037502502
File
File typeOriginal flash read
File size1,024.00 KB (1,048,576 bytes)
File keye6b12e30c62b9dd4
Identification read from the file
ECU nameEDC16C9
Read typeFull read (boot area included)
Bosch part / software0281011914 / 1037502502Offset in the file: 0x0CF2B2 / 0x000010
Bosch project identifier (EPK)99/1/EDC16C9/009/P319Offset in the file: 0x0C027A

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16C9 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281011914 and software number 1037502502. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16C9

HardwareSoftwareVehicles
02810119141037379357Opel Vectra-C, Opel Vectra
02810119141037379358Opel Vectra
02810119141037379359Opel Vectra-C, Opel Vectra
02810119141037379360Opel Astra
0281011914360Opel Vectra 914 soft 360
02810119151037372377Opel Vectra
02810119151037372381Opel Vectra
02810119151037372742Opel Signum

Bosch EDC16C9 original files

The Bosch EDC16C9 unit page