Original file

Mercedes-Benz ML 320CDI Bosch EDC16CP31 0281012414 / 1037375633

An original (stock) flash read of the Bosch EDC16CP31 control unit, fitted in Mercedes-Benz ML 320CDI, hardware number 0281012414 and software number 1037375633, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz ML 320CDIdiesel 224HP
Control unit
Bosch EDC16CP31
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
0281012414
Software number
1037375633

Technical data

Vehicle
BrandMercedes-Benz
Car modelML 320CDI
Enginediesel 224HP
Control unit
Control unitBosch EDC16CP31
ECU makerBosch
Hardware number0281012414
Software number1037375633
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameMercedes ML 320CDI 224HP
File keydea350c073910e69
Identification read from the file
ECU nameEDC16CP31
Read typeFull read (boot area included)
ProcessorMPC563
Bosch part / software1037375633Offset in the file: 0x040010
Bosch project identifier (EPK)99/1/EDC16CP31/001/B209Offset in the file: 0x1906F7

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281012414 and software number 1037375633. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16CP31

HardwareSoftwareVehicles
01444803021037390806Mercedes-Benz CLK
01603909141037390914Jeep WK
02430000211037396550Chrysler Voyager
02810119991037377140Chrysler grand cherokee 3.0CDI, Chrysler Grand Cherokee 2008 Turbo
02810125771037375193Mercedes-Benz C 320 2005 Turbo
0281012XXX1037396515Mercedes-Benz CLS350 3.0 CDI V6 Turbo
02810131341037378688Mercedes-Benz Merceds 906
02810133541037390527Opel Vivaro

Bosch EDC16CP31 original files

The Bosch EDC16CP31 unit page