Original file

Jeep Cherokee Bosch EDC16CP31 0281013529 / 1037391247

An original (stock) flash read of the Bosch EDC16CP31 control unit, fitted in Jeep Cherokee, hardware number 0281013529 and software number 1037391247, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jeep Cherokee2.8 diesel · 177.0PS / 130.2kW
Control unit
Bosch EDC16CP31
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281013529
Software number
1037391247

Technical data

Vehicle
BrandJeep
Car modelCherokee
Engine2.8 diesel
Power177.0PS / 130.2kW
Control unit
Control unitBosch EDC16CP31
ECU makerBosch
Hardware number0281013529
Software number1037391247
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key96bad781e793f09c
Identification read from the file
ECU nameEDC16CP31
Read typeCalibration only (data set)
Bosch part / software1037391247Offset in the file: 0x1C0010
Bosch project identifier (EPK)99/1/EDC16CP31/001/X538Offset in the file: 0x1C0486

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281013529 and software number 1037391247. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16CP31

HardwareSoftwareVehicles
02810133821037378245Mercedes-Benz ML 320 2007 Turbodiesel
02810133851037398880Mercedes-Benz R 320 2006 Turbo
02810133901037397473Renault Koleos 2009 Turbodiesel 110.3KWKW
02810134781037390815Mercedes-Benz E 280 2008 Turbo
02810136461037381282Chrysler Jeep Commander
02810136691037381147Mercedes-Benz Vito Turbodiesel KW
0281013669QNGA203S016Mercedes-Benz Actros
02810137211037381082Mercedes-Benz Mersedes Benz 2008y E280

Bosch EDC16CP31 original files

The Bosch EDC16CP31 unit page