Original file

Jeep Cherokee/Liberty Bosch EDC16CP31 05150333AA / 1037396184

An original (stock) flash read of the Bosch EDC16CP31 control unit, fitted in Jeep Cherokee/Liberty, hardware number 05150333AA and software number 1037396184, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jeep Cherokee/Liberty2.8 diesel 177PS
Control unit
Bosch EDC16CP31
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
05150333AA
Software number
1037396184

Technical data

Vehicle
BrandJeep
Car modelCherokee/Liberty
Engine2.8 diesel 177PS
Power177.0PS / 130.2kW
Control unit
Control unitBosch EDC16CP31
ECU makerBosch
Hardware number05150333AA
Software number1037396184
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keye4e25ed3729dad5c
Identification read from the file
ECU nameEDC16CP31
Read typeFull read (boot area included)
ProcessorMPC563
Bosch part / software1037396184Offset in the file: 0x040010
Bosch project identifier (EPK)99/1/EDC16CP31/001/X538Offset in the file: 0x1C0486

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 05150333AA and software number 1037396184. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16CP31

Bosch EDC16CP31 original files

The Bosch EDC16CP31 unit page