Original file

Jeep Wrangler Bosch EDC16CP31 05187205AG05187205AG05187205AG05187205AG / 1037384693

An original (stock) flash read of the Bosch EDC16CP31 control unit, fitted in Jeep Wrangler, hardware number 05187205AG05187205AG05187205AG05187205AG and software number 1037384693, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jeep Wrangler2.8 diesel · 177.0PS / 130.2kW
Control unit
Bosch EDC16CP31
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
05187205AG05187205AG05187205AG05187205AG
Software number
1037384693

Technical data

Vehicle
BrandJeep
Car modelWrangler
Engine2.8 diesel
Power177.0PS / 130.2kW
Control unit
Control unitBosch EDC16CP31
ECU makerBosch
Hardware number05187205AG05187205AG05187205AG05187205AG
Software number1037384693
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key094b32276228cd53
Identification read from the file
ECU nameEDC16CP31
Read typeCalibration only (data set)
Bosch part / software1037384693Offset in the file: 0x1C0010
Bosch project identifier (EPK)99/1/EDC16CP31/001/X538Offset in the file: 0x1C0486

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 05187205AG05187205AG05187205AG05187205AG and software number 1037384693. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16CP31

HardwareSoftwareVehicles
05094990AF05094990AF05094990AF05094990AF1037384694Dodge Nitro
05150333AA1037384690Jeep Wrangler
05150333AA1037384692Jeep Wrangler
05150333AA1037396184Jeep Cherokee/Liberty
37390622P521037390622Volkswagen T 5
3751381037375138Mercedes-Benz E 320 2006 Turbodiesel
3843971037384397Chrysler C300 3.0 CRD
3908121037390812Mercedes-Benz C 320 2004 Turbo

Bosch EDC16CP31 original files

The Bosch EDC16CP31 unit page