Original file

Mercedes-Benz E280 3.0 CDI V6 Bosch EDC16CP31 392690 / 1037392690

An original (stock) flash read of the Bosch EDC16CP31 control unit, fitted in Mercedes-Benz E280 3.0 CDI V6, hardware number 392690 and software number 1037392690, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E280 3.0 CDI V63.0 diesel 190.0PS / 139.7kW
Control unit
Bosch EDC16CP31
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
392690
Software number
1037392690

Technical data

Vehicle
BrandMercedes-Benz
Car modelE280 3.0 CDI V6
Engine3.0 diesel 190.0PS / 139.7kW
Control unit
Control unitBosch EDC16CP31
ECU makerBosch
Hardware number392690
Software number1037392690
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keye835ecc92ae0fdd8
Identification read from the file
ECU nameEDC16CP31
Read typeCalibration only (data set)
Bosch part / software1037392690Offset in the file: 0x190010
Bosch project identifier (EPK)99/1/EDC16CP31/001/B209Offset in the file: 0x1906F7

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 392690 and software number 1037392690. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16CP31

HardwareSoftwareVehicles
37390622P521037390622Volkswagen T 5
3751381037375138Mercedes-Benz E 320 2006 Turbodiesel
3843971037384397Chrysler C300 3.0 CRD
3908121037390812Mercedes-Benz C 320 2004 Turbo
68030126AC68030126AC68030126AC68030126AC1037396190Chrysler Jeep Wrangler
68034130AC68034130AC68034130AC68034130AC1037396193Jeep Wrangler
AC4907L17511037384692Jeep Wrangler
CAA8VN50R1XX04X1037391391Dodge Nitro 2,8CRD, Dodge Nitro

Bosch EDC16CP31 original files

The Bosch EDC16CP31 unit page