Original file

Chrysler Grand Cherokee 2002 Turbodiesel Bosch EDC16CP31 CAR8VD50R1XX06X / 1037394839

An original (stock) flash read of the Bosch EDC16CP31 control unit, fitted in Chrysler Grand Cherokee 2002 Turbodiesel, hardware number CAR8VD50R1XX06X and software number 1037394839, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Chrysler Grand Cherokee 2002 Turbodiesel3.0 diesel · 217.9PS / 160.3kW
Control unit
Bosch EDC16CP31
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CAR8VD50R1XX06X
Software number
1037394839

Technical data

Vehicle
BrandChrysler
Car modelGrand Cherokee 2002 Turbodiesel
Engine3.0 diesel
Power217.9PS / 160.3kW
Control unit
Control unitBosch EDC16CP31
ECU makerBosch
Hardware numberCAR8VD50R1XX06X
Software number1037394839
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameChrysler Grand Cherokee 3.0 CRD
File keyb6dafd6abf95e13d
Identification read from the file
ECU nameEDC16CP31
Read typeCalibration only (data set)
Bosch part / software1037394839Offset in the file: 0x1C0010
Bosch project identifier (EPK)99/1/EDC16CP31/001/X538Offset in the file: 0x1C0486

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CAR8VD50R1XX06X and software number 1037394839. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16CP31

HardwareSoftwareVehicles
AC4907L17511037384692Jeep Wrangler
CAA8VN50R1XX04X1037391391Dodge Nitro 2,8CRD, Dodge Nitro
CAJ9VN60R0XX0241037396185Chrysler Wrangler
CAJ9VN60R0XX0271037396187Chrysler Jeep Wrangler
CAR8VN50R1XX05X1037384667Chrysler Voyager
CAR8VN50R1XX06X1037394840Chrysler Voyager
CAR9VN60R0XX02X1037396551Chrysler Grand Voyager
CMJ7VN45R0XX0241037384679Chrysler Jeep Wrangler

Bosch EDC16CP31 original files

The Bosch EDC16CP31 unit page