Original file

Chrysler Jeep Wrangler Bosch EDC16CP31 CMJ7VN45R0XX044 / 1037384693

An original (stock) flash read of the Bosch EDC16CP31 control unit, fitted in Chrysler Jeep Wrangler, hardware number CMJ7VN45R0XX044 and software number 1037384693, 256.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Chrysler Jeep Wrangler2.8 diesel · 177.0PS / 130.2kW
Control unit
Bosch EDC16CP31
Read type
Calibration only (data set)
File
256.00 KB · Flash
Hardware number
CMJ7VN45R0XX044
Software number
1037384693

Technical data

Vehicle
BrandChrysler
Car modelJeep Wrangler
Engine2.8 diesel
Power177.0PS / 130.2kW
Control unit
Control unitBosch EDC16CP31
ECU makerBosch
Hardware numberCMJ7VN45R0XX044
Software number1037384693
File
File typeOriginal flash read
File size256.00 KB (262,144 bytes)
File keyd07360ed9988a5f9
Identification read from the file
ECU nameEDC16CP31
Read typeCalibration only (data set)
Bosch part / software1037384693Offset in the file: 0x000010
Bosch project identifier (EPK)99/1/EDC16CP31/001/X538Offset in the file: 0x000486

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CMJ7VN45R0XX044 and software number 1037384693. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16CP31

HardwareSoftwareVehicles
CAR8VN50R1XX05X1037384667Chrysler Voyager
CAR8VN50R1XX06X1037394840Chrysler Voyager
CAR9VN60R0XX02X1037396551Chrysler Grand Voyager
CMJ7VN45R0XX0241037384679Chrysler Jeep Wrangler
CMJ9VD60R0XX0231037396190Chrysler Jeep Wrangler
CR3-OM646-PUBKEY-S0241037378232Mercedes-Benz Vito 109 2200, Mercedes-Benz Vito
CR4-642-42P2-164WASS-140KW-PT2R05-DPF-0605X009ME1037375631Mercedes-Benz ML
CR4-642-42P2-164WASS-140KW-PT2R05-LR-0605X009ME1037375630Mercedes-Benz ML

Bosch EDC16CP31 original files

The Bosch EDC16CP31 unit page