Original file

Mercedes-Benz ML300 3.0CDI W164 Bosch EDC16CP31 CR4-642-42P4-219CA-165KW-PT2R05-LR-0606X041 / 1037381075

An original (stock) flash read of the Bosch EDC16CP31 control unit, fitted in Mercedes-Benz ML300 3.0CDI W164, hardware number CR4-642-42P4-219CA-165KW-PT2R05-LR-0606X041 and software number 1037381075, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz ML300 3.0CDI W1643.0 diesel
Control unit
Bosch EDC16CP31
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CR4-642-42P4-219CA-165KW-PT2R05-LR-0606X041
Software number
1037381075

Technical data

Vehicle
BrandMercedes-Benz
Car modelML300 3.0CDI W164
Engine3.0 diesel
Control unit
Control unitBosch EDC16CP31
ECU makerBosch
Hardware numberCR4-642-42P4-219CA-165KW-PT2R05-LR-0606X041
Software number1037381075
File
File typeOriginal flash read
File size2,048.00 KB (2,097,150 bytes)
From the file nameMercedes ML300 W164 EDC16CP31 165
File key1ffb5e61f995b4b1
Identification read from the file
ECU nameEDC16CP31
Read typeCalibration only (data set)
Bosch part / software1037381075Offset in the file: 0x190010
Bosch project identifier (EPK)99/1/EDC16CP31/001/B209Offset in the file: 0x1906F7

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR4-642-42P4-219CA-165KW-PT2R05-LR-0606X041 and software number 1037381075. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16CP31

Bosch EDC16CP31 original files

The Bosch EDC16CP31 unit page