Original file

Mercedes-Benz ML Bosch EDC16CP31 CR4-642-42P9-164WASS-140KW-ADB-DPF-2507X064BME / 1037392639

An original (stock) flash read of the Bosch EDC16CP31 control unit, fitted in Mercedes-Benz ML, hardware number CR4-642-42P9-164WASS-140KW-ADB-DPF-2507X064BME and software number 1037392639, 448.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz MLdiesel 190PS
Control unit
Bosch EDC16CP31
Read type
Calibration only (data set)
File
448.00 KB · Flash
Hardware number
CR4-642-42P9-164WASS-140KW-ADB-DPF-2507X064BME
Software number
1037392639

Technical data

Vehicle
BrandMercedes-Benz
Car modelML
Enginediesel 190PS
Displacement3.0
Power190PS / 139.7kW
Control unit
Control unitBosch EDC16CP31
ECU makerBosch
Hardware numberCR4-642-42P9-164WASS-140KW-ADB-DPF-2507X064BME
Software number1037392639
File
File typeOriginal flash read
File size448.00 KB (458,752 bytes)
File key8a6806285b577344
Identification read from the file
ECU nameEDC16CP31
Read typeCalibration only (data set)
Bosch part / software1037392639Offset in the file: 0x000010
Bosch project identifier (EPK)99/1/EDC16CP31/001/B209Offset in the file: 0x0006F7

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR4-642-42P9-164WASS-140KW-ADB-DPF-2507X064BME and software number 1037392639. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16CP31

Bosch EDC16CP31 original files

The Bosch EDC16CP31 unit page