Original file

Mercedes-Benz Sprinter Bosch EDC16CP31 CR4_NAF-OM642-PK-S001 / 1037398897

An original (stock) flash read of the Bosch EDC16CP31 control unit, fitted in Mercedes-Benz Sprinter, hardware number CR4_NAF-OM642-PK-S001 and software number 1037398897, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinter2.1 diesel 162PS
Control unit
Bosch EDC16CP31
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
CR4_NAF-OM642-PK-S001
Software number
1037398897

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter
Engine2.1 diesel 162PS
Power162.4PS / 119.4kW
Control unit
Control unitBosch EDC16CP31
ECU makerBosch
Hardware numberCR4_NAF-OM642-PK-S001
Software number1037398897
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key4444e65d9a6f3137
Identification read from the file
ECU nameEDC16CP31
Read typeFull read (boot area included)
ProcessorMPC563
Bosch part / software1037398897Offset in the file: 0x040010
Bosch project identifier (EPK)99/1/EDC16CP31/001/518Offset in the file: 0x1802F8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR4_NAF-OM642-PK-S001 and software number 1037398897. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz SprinterFlash2,048.00 KB€15Add to cart

All reads of CR4_NAF-OM642-PK-S001 / 1037398897

Other pairs of Bosch EDC16CP31

HardwareSoftwareVehicles
CR4C-642-53W1-WK-BIN10_OP-160KW-S2B_4X4_DPF_EGS53-1207X0061037390506Jeep Grand Cherokee
CR4C-642-53W1-WK-BIN10_OP-160KW-V1_4X4_DPF_EGS53-2807X0081037392204Jeep Grand Cherokee, Mercedes-Benz
CR4C-642-53W1-WK-BIN10_OP-160kW-V1_4x4_Dpf_EGS53-2807x0081037392204Jeep Cherokee
CR4_NAF-OM642-PK-S0011037386797Mercedes-Benz Sprinter 3.0CDI
CR4_NFZ-OM642-PK-S0011037381129Mercedes-Benz Sprinter W906) 211 2200
CR4_NFZ-OM642-PK-S0021037381134Mercedes-Benz Sprinter
CR4_NFZ-OM642-PK-S0021037391297Mercedes-Benz Sprinter, Mercedes-Benz Sprinter218/318/418/518
CR4_NFZ-OM642-PK-S0041037383393Mercedes-Benz Sprinter

Bosch EDC16CP31 original files

The Bosch EDC16CP31 unit page