Original file

Mercedes-Benz Sprinter W906) 211 2200 Bosch EDC16CP31 CR4_NFZ-OM642-PK-S001 / 1037381129

An original (stock) flash read of the Bosch EDC16CP31 control unit, fitted in Mercedes-Benz Sprinter W906) 211 2200, hardware number CR4_NFZ-OM642-PK-S001 and software number 1037381129, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinter W906) 211 2200diesel
Control unit
Bosch EDC16CP31
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
CR4_NFZ-OM642-PK-S001
Software number
1037381129
Bosch part / software
1037505811

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter W906) 211 2200
Enginediesel
Control unit
Control unitBosch EDC16CP31
ECU makerBosch
Hardware numberCR4_NFZ-OM642-PK-S001
Software number1037381129
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameMercedes Sprinter W906 211 2200
File keyb1405b12bb222f3d
Identification read from the file
ECU nameEDC16CP31
Read typeFull read (boot area included)
ProcessorMPC563
Bosch part / software1037505811Offset in the file: 0x040010

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR4_NFZ-OM642-PK-S001 and software number 1037381129. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16CP31

HardwareSoftwareVehicles
CR4C-642-53W1-WK-BIN10_OP-160KW-V1_4X4_DPF_EGS53-2807X0081037392204Jeep Grand Cherokee, Mercedes-Benz
CR4C-642-53W1-WK-BIN10_OP-160kW-V1_4x4_Dpf_EGS53-2807x0081037392204Jeep Cherokee
CR4_NAF-OM642-PK-S0011037386797Mercedes-Benz Sprinter 3.0CDI
CR4_NAF-OM642-PK-S0011037398897Mercedes-Benz Sprinter
CR4_NFZ-OM642-PK-S0021037381134Mercedes-Benz Sprinter
CR4_NFZ-OM642-PK-S0021037391297Mercedes-Benz Sprinter, Mercedes-Benz Sprinter218/318/418/518
CR4_NFZ-OM642-PK-S0041037383393Mercedes-Benz Sprinter
CR4_NFZ-OM642-PK-S0071037393814Mercedes-Benz Vito, Mercedes-Benz Viano 300CDI

Bosch EDC16CP31 original files

The Bosch EDC16CP31 unit page