Original file

Mercedes-Benz R Bosch EDC16CP31 CR4-OM642-PUBKEY-S003 / 1037378253

An original (stock) flash read of the Bosch EDC16CP31 control unit, fitted in Mercedes-Benz R, hardware number CR4-OM642-PUBKEY-S003 and software number 1037378253, 2,560.50 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Rdiesel 211PS
Control unit
Bosch EDC16CP31
Read type
Full read (boot area included)
File
2,560.50 KB · Flash
Hardware number
CR4-OM642-PUBKEY-S003
Software number
1037378253

Technical data

Vehicle
BrandMercedes-Benz
Car modelR
Enginediesel 211PS
Power211.0PS / 155.2kW
Control unit
Control unitBosch EDC16CP31
ECU makerBosch
Hardware numberCR4-OM642-PUBKEY-S003
Software number1037378253
File
File typeOriginal flash read
File size2,560.50 KB (2,621,952 bytes)
File keya9ea113db9d087f2
Identification read from the file
ECU nameEDC16CP31
Read typeFull read (boot area included)
ProcessorMPC563
Bosch part / software1037378253Offset in the file: 0x004010
Bosch project identifier (EPK)99/1/EDC16CP31/001/B209Offset in the file: 0x2106F7

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR4-OM642-PUBKEY-S003 and software number 1037378253. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16CP31

HardwareSoftwareVehicles
CR4-OM642-PUBKEY-S0021037393836Mercedes-Benz E280, Mercedes-Benz E
CR4-OM642-PUBKEY-S0021037393883Mercedes-Benz ML, Mercedes-Benz ML280
CR4-OM642-PUBKEY-S0021037393895Mercedes-Benz ML
CR4-OM642-PUBKEY-S0021037398874Mercedes-Benz DaimlerChrysler
CR4-OM642-PUBKEY-S0031037393894Mercedes-Benz ML
CR40-64X-21R2-T1N-80KW-TSG330-EURO4_OP_T4-004_ME04A1037529298Mercedes-Benz Sprinter 2.2CDI
CR40-64X-42N0-906-115KW-N7-0ANF-02-APW-001_ME21037386797Mercedes-Benz SprinterW906)
CR40-64X-43N0-906-115KW-N7-0ANF-01-IAS-003_ME31037392606Mercedes-Benz Sprinter

Bosch EDC16CP31 original files

The Bosch EDC16CP31 unit page