Original file

Mercedes-Benz Sprinter W906) 218 3000 Bosch EDC16CP31 CR40-64X-46N0-906-115KW-N7-0ANF-01-IAS-003_ME5 / 1037398897

An original (stock) flash read of the Bosch EDC16CP31 control unit, fitted in Mercedes-Benz Sprinter W906) 218 3000, hardware number CR40-64X-46N0-906-115KW-N7-0ANF-01-IAS-003_ME5 and software number 1037398897, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinter W906) 218 3000diesel · 154.0PS / 113.3kW
Control unit
Bosch EDC16CP31
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CR40-64X-46N0-906-115KW-N7-0ANF-01-IAS-003_ME5
Software number
1037398897

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter W906) 218 3000
Enginediesel
Displacement2.1
Power154.0PS / 113.3kW
Control unit
Control unitBosch EDC16CP31
ECU makerBosch
Hardware numberCR40-64X-46N0-906-115KW-N7-0ANF-01-IAS-003_ME5
Software number1037398897
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameMercedes Sprinter W906 218 3000
File keyc436a096ad28ca1e
Identification read from the file
ECU nameEDC16CP31
Read typeCalibration only (data set)
Bosch part / software1037398897Offset in the file: 0x180010
Bosch project identifier (EPK)99/1/EDC16CP31/001/518Offset in the file: 0x1802F8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR40-64X-46N0-906-115KW-N7-0ANF-01-IAS-003_ME5 and software number 1037398897. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz SprinterFlash512.00 KB€15Add to cart
Mercedes-Benz SprinterFlash512.00 KB€15Add to cart
Mercedes-Benz SprinterFlash2,048.00 KB€15Add to cart
Mercedes-Benz SprinterFlash2,048.00 KB€15Add to cart

All reads of CR40-64X-46N0-906-115KW-N7-0ANF-01-IAS-003_ME5 / 1037398897

Other pairs of Bosch EDC16CP31

HardwareSoftwareVehicles
CR4-OM642-PUBKEY-S0031037393894Mercedes-Benz ML
CR40-64X-21R2-T1N-80KW-TSG330-EURO4_OP_T4-004_ME04A1037529298Mercedes-Benz Sprinter 2.2CDI
CR40-64X-42N0-906-115KW-N7-0ANF-02-APW-001_ME21037386797Mercedes-Benz SprinterW906)
CR40-64X-43N0-906-115KW-N7-0ANF-01-IAS-003_ME31037392606Mercedes-Benz Sprinter
CR40-64X-65T2-906-135KW-40-0MEF-02-ATZ-002_8_DPF_ME11037381134Mercedes-Benz Sprinter, Mercedes-Benz Sprinter W906) 518 3000
CR40-64X-70T5-639-070KW-43P-0MEF-02-IAS-002_ME031037398860Mercedes-Benz Vito, Mercedes-Benz VITO109
CR40-64X-70T5-639-085KW-43P-0MEF-02-RFV-001_ME021037386787Mercedes-Benz Vito
CR40-64X-70T5-906-065KW-40N-0MEF-01-IAG-002_DPF7_ME91037386903Mercedes-Benz Sprinter W906) 309 2200, Mercedes-Benz Sprinter

Bosch EDC16CP31 original files

The Bosch EDC16CP31 unit page