Original file

Chrysler Grand Cherokee Bosch EDC16CP31 CR4C-42W1-WH-155 / 1037377141

An original (stock) flash read of the Bosch EDC16CP31 control unit, fitted in Chrysler Grand Cherokee, hardware number CR4C-42W1-WH-155 and software number 1037377141, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Chrysler Grand Cherokee3.0 diesel · 211.0PS / 155.2kW
Control unit
Bosch EDC16CP31
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CR4C-42W1-WH-155
Software number
1037377141

Technical data

Vehicle
BrandChrysler
Car modelGrand Cherokee
Engine3.0 diesel
Power211.0PS / 155.2kW
Control unit
Control unitBosch EDC16CP31
ECU makerBosch
Hardware numberCR4C-42W1-WH-155
Software number1037377141
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key0780db3d6f906873
Identification read from the file
ECU nameEDC16CP31
Read typeCalibration only (data set)
Bosch part / software1037377141Offset in the file: 0x190010
Bosch project identifier (EPK)99/1/EDC16CP31/001/B209Offset in the file: 0x1906FB

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR4C-42W1-WH-155 and software number 1037377141. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16CP31

HardwareSoftwareVehicles
CR40-64x-46N0-906-115kW-N7-0ANF-01-IAS-003_ME51037398897Mercedes-Benz Sprinter
CR40-64x-70T2-639-085kW-43P-0AEF-02-RFV-001_ME11037383373Mercedes-Benz Vito 220 2006 Turbodiesel
CR40-64x-70T3-906-095KW-40-0MEF-03-IAG-001_DPF7_ME71037383391Mercedes-Benz Sprinter213/313
CR40-64x-70T5-906-135kW-40-0AEF-01-DAG-001_DPF8_ME31037386798Mercedes-Benz Sprinter 2007 Turbo Diesel
CR4C-42W1-WH-155KW-ME-1905X0361037377141Chrysler Grand Cherokee, Jeep
CR4C-42W1-WH-1601037377140Chrysler Jeep Cherokee
CR4C-42W1-WH-160KW-ME-1905X0361037377140Jeep Grand Cherokee, Chrysler
CR4C-43W0-LE-155KW-ME-3405X0511037378472Chrysler C300, Chrysler C300 2003 Turbo Diesel, Chrysler 300M

Bosch EDC16CP31 original files

The Bosch EDC16CP31 unit page