Original file

Chrysler 300 Bosch EDC16CP31 CR4C-43W0-LER-160 / 1037384399

An original (stock) flash read of the Bosch EDC16CP31 control unit, fitted in Chrysler 300, hardware number CR4C-43W0-LER-160 and software number 1037384399, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Chrysler 3003.0 diesel 218PS
Control unit
Bosch EDC16CP31
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CR4C-43W0-LER-160
Software number
1037384399

Technical data

Vehicle
BrandChrysler
Car model300
Engine3.0 diesel 218PS
Control unit
Control unitBosch EDC16CP31
ECU makerBosch
Hardware numberCR4C-43W0-LER-160
Software number1037384399
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key2389aa5e0a1c07d5
Identification read from the file
ECU nameEDC16CP31
Read typeCalibration only (data set)
Bosch part / software1037384399Offset in the file: 0x190010
Bosch project identifier (EPK)99/1/EDC16CP31/001/B209Offset in the file: 0x1906FB

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR4C-43W0-LER-160 and software number 1037384399. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16CP31

HardwareSoftwareVehicles
CR4C-43W0-LE-160KW-ME-3405X0511037378471Chrysler C300, Chrysler 300C, Chrysler 300
CR4C-43W0-LE-160KW-V1-0706X071_DCA1037382486Chrysler 300
CR4C-43W0-LE-160KW-V1-0706X071_DCA1037384397Chrysler C300, Chrysler 300, Chrysler 300C
CR4C-43W0-LE-160KW-V2-4605X0621037379937Chrysler C300 Turbodiesel 160.3KWKW, Chrysler 300C, Chrysler 300
CR4C-43W0-LER-160KW-ME-4105X0571037379342Chrysler C300
CR4C-43W0-LER-160KW-V1-0706X071_DCA1037384399Chrysler 300C
CR4C-43W0-WH-155KW-V1-4605X0631037379932Chrysler Grand Cherokee
CR4C-43W0-WH-1601037383009Jeep Grand Cherokee

Bosch EDC16CP31 original files

The Bosch EDC16CP31 unit page