Original file

Jeep Grand Cherokee Bosch EDC16CP31 CR4C-43W0-WH-160KW-V1-4605X063 / 1037379931

An original (stock) flash read of the Bosch EDC16CP31 control unit, fitted in Jeep Grand Cherokee, hardware number CR4C-43W0-WH-160KW-V1-4605X063 and software number 1037379931, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jeep Grand Cherokee3.0 diesel 218PS
Control unit
Bosch EDC16CP31
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
CR4C-43W0-WH-160KW-V1-4605X063
Software number
1037379931

Technical data

Vehicle
BrandJeep
Car modelGrand Cherokee
Engine3.0 diesel 218PS
Power218.0PS / 160.3kW
Control unit
Control unitBosch EDC16CP31
ECU makerBosch
Hardware numberCR4C-43W0-WH-160KW-V1-4605X063
Software number1037379931
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key474e035e7f3ce33a
Identification read from the file
ECU nameEDC16CP31
Read typeFull read (boot area included)
ProcessorMPC563
Bosch part / software1037379931Offset in the file: 0x040010
Bosch project identifier (EPK)99/1/EDC16CP31/001/B209Offset in the file: 0x1906FB

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR4C-43W0-WH-160KW-V1-4605X063 and software number 1037379931. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Jeep Grand CherokeeFlash2,048.00 KB€15Add to cart
Jeep Grand CherokeeFlash2,048.00 KB€15Add to cart
Jeep Grand CherokeeFlash2,048.00 KB€15Add to cart
Jeep CHEROKEEFlash2,048.00 KB€15Add to cart
Jeep Grand CherokeeFlash2,048.00 KB€15Add to cart
Chrysler 300C 2005 Turbodiesel 160.3KWKWFlash · From the file name: Chrysler 300C 2005 Turbodiesel Bosch436.00 KB€15Add to cart

All reads of CR4C-43W0-WH-160KW-V1-4605X063 / 1037379931

Other pairs of Bosch EDC16CP31

HardwareSoftwareVehicles
CR4C-43W0-LER-160KW-V1-0706X071_DCA1037384399Chrysler 300C
CR4C-43W0-WH-155KW-V1-4605X0631037379932Chrysler Grand Cherokee
CR4C-43W0-WH-1601037383009Jeep Grand Cherokee
CR4C-43W0-WH-160KW-V1-2806X0721037383009Jeep Grand Cherokee, Jeep Grand Cherokee, Jeep Cherokee/Liberty
CR4C-43W0-WHP-1551037388130Jeep Grand Cherokee
CR4C-43W0-WHP-155KW-V1-0606X0691037381277Jeep Grand Cherokee
CR4C-43W0-WHP-155KW-V2-1907X0711037388130Chrysler Grand Cherokee 2006 Turbo, Chrysler Grand Cherokee, Jeep
CR4C-43W0-WHP-1601037388131Chrysler Jeep Grand Cherokee

Bosch EDC16CP31 original files

The Bosch EDC16CP31 unit page