Original file

Chrysler Jeep Grand Cherokee Bosch EDC16CP31 CR4C-43W0-WHP-160 / 1037388131

An original (stock) flash read of the Bosch EDC16CP31 control unit, fitted in Chrysler Jeep Grand Cherokee, hardware number CR4C-43W0-WHP-160 and software number 1037388131, 448.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Chrysler Jeep Grand Cherokee3.0 diesel · 218.0PS / 160.3kW
Control unit
Bosch EDC16CP31
Read type
Calibration only (data set)
File
448.00 KB · Flash
Hardware number
CR4C-43W0-WHP-160
Software number
1037388131

Technical data

Vehicle
BrandChrysler
Car modelJeep Grand Cherokee
Engine3.0 diesel
Power218.0PS / 160.3kW
Control unit
Control unitBosch EDC16CP31
ECU makerBosch
Hardware numberCR4C-43W0-WHP-160
Software number1037388131
File
File typeOriginal flash read
File size448.00 KB (458,752 bytes)
File key7b1d2debe496184d
Identification read from the file
ECU nameEDC16CP31
Read typeCalibration only (data set)
Bosch part / software1037388131Offset in the file: 0x000010
Bosch project identifier (EPK)99/1/EDC16CP31/001/B209Offset in the file: 0x0006FB

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR4C-43W0-WHP-160 and software number 1037388131. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16CP31

HardwareSoftwareVehicles
CR4C-43W0-WH-160KW-V1-4605X0631037379931Jeep Grand Cherokee, Jeep 300C 2005 Turbodiesel 160.3KWKW, Jeep CHEROKEE
CR4C-43W0-WHP-1551037388130Jeep Grand Cherokee
CR4C-43W0-WHP-155KW-V1-0606X0691037381277Jeep Grand Cherokee
CR4C-43W0-WHP-155KW-V2-1907X0711037388130Chrysler Grand Cherokee 2006 Turbo, Chrysler Grand Cherokee, Jeep
CR4C-43W0-WHP-160KW-V1-0606X0691037381276Chrysler Grand Cherokee, Chrysler Grand Cherokee 3.0CRDI Turbodiesel, Chrysler Grand Cherokee 2006 Turbodiesel
CR4C-43W0-WHP-160KW-V2-1907X0711037388131Jeep Grand Cherokee, Chrysler
CR4C-43W0-XH-155KW-V1-0706X070_DCA1037381283Chrysler Jeep Grand Cherokee
CR4C-43W0-XH-155KW-V1-4605X0621037379935Jeep Commander

Bosch EDC16CP31 original files

The Bosch EDC16CP31 unit page