Original file

Chrysler Jeep Grand Cherokee Bosch EDC16CP31 CR4C-43W0-XH-155KW-V1-0706X070_DCA / 1037381283

An original (stock) flash read of the Bosch EDC16CP31 control unit, fitted in Chrysler Jeep Grand Cherokee, hardware number CR4C-43W0-XH-155KW-V1-0706X070_DCA and software number 1037381283, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Chrysler Jeep Grand Cherokee3.0 diesel 218PS
Control unit
Bosch EDC16CP31
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CR4C-43W0-XH-155KW-V1-0706X070_DCA
Software number
1037381283

Technical data

Vehicle
BrandChrysler
Car modelJeep Grand Cherokee
Engine3.0 diesel 218PS
Power218.0PS / 160.3kW
Control unit
Control unitBosch EDC16CP31
ECU makerBosch
Hardware numberCR4C-43W0-XH-155KW-V1-0706X070_DCA
Software number1037381283
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keybad13d17c857f19a
Identification read from the file
ECU nameEDC16CP31
Read typeCalibration only (data set)
Bosch part / software1037381283Offset in the file: 0x190010
Bosch project identifier (EPK)99/1/EDC16CP31/001/B209Offset in the file: 0x1906FB

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR4C-43W0-XH-155KW-V1-0706X070_DCA and software number 1037381283. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16CP31

HardwareSoftwareVehicles
CR4C-43W0-WHP-155KW-V2-1907X0711037388130Chrysler Grand Cherokee 2006 Turbo, Chrysler Grand Cherokee, Jeep
CR4C-43W0-WHP-1601037388131Chrysler Jeep Grand Cherokee
CR4C-43W0-WHP-160KW-V1-0606X0691037381276Chrysler Grand Cherokee, Chrysler Grand Cherokee 3.0CRDI Turbodiesel, Chrysler Grand Cherokee 2006 Turbodiesel
CR4C-43W0-WHP-160KW-V2-1907X0711037388131Jeep Grand Cherokee, Chrysler
CR4C-43W0-XH-155KW-V1-4605X0621037379935Jeep Commander
CR4C-43W0-XH-155KW-V2-1907X064_RB1037392211Jeep Commander
CR4C-43W0-XH-155KW-V2-1907X073_DCA1037389388Jeep Commander, Jeep Grand Cherokee
CR4C-43W0-XH-1601037388134Jeep Commander

Bosch EDC16CP31 original files

The Bosch EDC16CP31 unit page