Original file
Jeep Commander Bosch EDC16CP31 CR4C-43W0-XH-160 / 1037388134
An original (stock) flash read of the Bosch EDC16CP31 control unit, fitted in Jeep Commander, hardware number CR4C-43W0-XH-160 and software number 1037388134, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Jeep Commander3.0 · 218.0PS / 160.3kW
- Control unit
- Bosch EDC16CP31
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- CR4C-43W0-XH-160
- Software number
- 1037388134
Technical data
| Brand | Jeep |
|---|---|
| Car model | Commander |
| Engine | 3.0 |
| Fuel | Diesel |
| Power | 218.0PS / 160.3kW |
| Control unit | Bosch EDC16CP31 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR4C-43W0-XH-160 |
| Software number | 1037388134 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | c68a57eafdef153a |
| ECU name | EDC16CP31 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 1037388134 | Offset in the file: 0x190010 |
| Bosch project identifier (EPK) | 99/1/EDC16CP31/001/B209 | Offset in the file: 0x1906FB |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC16CP31 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR4C-43W0-XH-160 and software number 1037388134. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC16CP31
| Hardware | Software | Vehicles |
|---|---|---|
| CR4C-43W0-XH-155KW-V1-0706X070_DCA | 1037381283 | Chrysler Jeep Grand Cherokee |
| CR4C-43W0-XH-155KW-V1-4605X062 | 1037379935 | Jeep Commander |
| CR4C-43W0-XH-155KW-V2-1907X064_RB | 1037392211 | Jeep Commander |
| CR4C-43W0-XH-155KW-V2-1907X073_DCA | 1037389388 | Jeep Commander, Jeep Grand Cherokee |
| CR4C-43W0-XH-160KW-V1-0706X070_DCA | 1037381282 | Jeep Commander |
| CR4C-43W0-XH-160KW-V1-4605X062 | 1037379934 | Jeep Commander |
| CR4C-43W0-XH-160KW-V2-1907X064_RB | 1037392210 | Jeep Commander, Jeep Commander, Chrysler |
| CR4C-43W0-XH-160KW-V2-1907X073_DCA | 1037388134 | Jeep Commander |