Original file

Jeep Commander Bosch EDC16CP31 CR4C-43W0-XH-160KW-V1-4605X062 / 1037379934

An original (stock) flash read of the Bosch EDC16CP31 control unit, fitted in Jeep Commander, hardware number CR4C-43W0-XH-160KW-V1-4605X062 and software number 1037379934, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jeep Commander3.0 diesel · 218.0PS / 160.3kW
Control unit
Bosch EDC16CP31
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CR4C-43W0-XH-160KW-V1-4605X062
Software number
1037379934

Technical data

Vehicle
BrandJeep
Car modelCommander
Engine3.0 diesel
Power218.0PS / 160.3kW
Control unit
Control unitBosch EDC16CP31
ECU makerBosch
Hardware numberCR4C-43W0-XH-160KW-V1-4605X062
Software number1037379934
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyb12eb66fb98d2502
Identification read from the file
ECU nameEDC16CP31
Read typeCalibration only (data set)
Bosch part / software1037379934Offset in the file: 0x190010
Bosch project identifier (EPK)99/1/EDC16CP31/001/B209Offset in the file: 0x1906FB

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR4C-43W0-XH-160KW-V1-4605X062 and software number 1037379934. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Jeep CommanderFlash448.00 KB€15Add to cart
Jeep CommanderFlash2,048.00 KB€15Add to cart
Jeep CommanderFlash2,048.00 KB€15Add to cart

All reads of CR4C-43W0-XH-160KW-V1-4605X062 / 1037379934

Other pairs of Bosch EDC16CP31

HardwareSoftwareVehicles
CR4C-43W0-XH-155KW-V2-1907X064_RB1037392211Jeep Commander
CR4C-43W0-XH-155KW-V2-1907X073_DCA1037389388Jeep Commander, Jeep Grand Cherokee
CR4C-43W0-XH-1601037388134Jeep Commander
CR4C-43W0-XH-160KW-V1-0706X070_DCA1037381282Jeep Commander
CR4C-43W0-XH-160KW-V2-1907X064_RB1037392210Jeep Commander, Jeep Commander, Chrysler
CR4C-43W0-XH-160KW-V2-1907X073_DCA1037388134Jeep Commander
CR4C-43W0-XHEU3-160KW189VM-V1-3606X0041037386381Chrysler Jeep Comander, Chrysler Commander, Jeep
CR4C-43W1-LE-EU4OP-155KW-V2-0508X073_DCA1037395253Chrysler 300, Chrysler 300C

Bosch EDC16CP31 original files

The Bosch EDC16CP31 unit page