Original file

Chrysler 300 Bosch EDC16CP31 CR4C-43W1-LER-160KW-V2-0508X073_DCA / 1037395255

An original (stock) flash read of the Bosch EDC16CP31 control unit, fitted in Chrysler 300, hardware number CR4C-43W1-LER-160KW-V2-0508X073_DCA and software number 1037395255, 448.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Chrysler 3003.0 diesel 160KW
Control unit
Bosch EDC16CP31
Read type
Calibration only (data set)
File
448.00 KB · Flash
Hardware number
CR4C-43W1-LER-160KW-V2-0508X073_DCA
Software number
1037395255

Technical data

Vehicle
BrandChrysler
Car model300
Engine3.0 diesel 160KW
Control unit
Control unitBosch EDC16CP31
ECU makerBosch
Hardware numberCR4C-43W1-LER-160KW-V2-0508X073_DCA
Software number1037395255
File
File typeOriginal flash read
File size448.00 KB (458,752 bytes)
File key8090884af2f6c2f0
Identification read from the file
ECU nameEDC16CP31
Read typeCalibration only (data set)
Bosch part / software1037395255Offset in the file: 0x000010
Bosch project identifier (EPK)99/1/EDC16CP31/001/B209Offset in the file: 0x0006FB

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR4C-43W1-LER-160KW-V2-0508X073_DCA and software number 1037395255. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Chrysler 300Flash2,048.00 KB€15Add to cart

All reads of CR4C-43W1-LER-160KW-V2-0508X073_DCA / 1037395255

Other pairs of Bosch EDC16CP31

HardwareSoftwareVehicles
CR4C-43W0-XHEU3-160KW189VM-V1-3606X0041037386381Chrysler Jeep Comander, Chrysler Commander, Jeep
CR4C-43W1-LE-EU4OP-155KW-V2-0508X073_DCA1037395253Chrysler 300, Chrysler 300C
CR4C-43W1-LE-EU4OP-1601037395254Chrysler C300, Chrysler 300
CR4C-43W1-LE-EU4OP-160KW-V2-0508X073_DCA1037395254Chrysler 300, Chrysler C300
CR4C-43W1-LER-160KW-V3-RHD-0508X068_DCA1037395256Chrysler C300
CR4C-642-43W1-LEWA-EU4OP-155kW-V3-0508x067_RB1037395257Chrysler C300
CR4C-642-43W1-LEWA-EU4OP-160KW-V3-0508X067_RB1037395258Chrysler C300, Chrysler 300C
CR4C-642-43W1-LEWA-EU4OP-160kW-V3-0508x067_RB1037395258Chrysler C300 2005 Turbodiesel 160.3KWKW, Chrysler C300, Chrysler 300

Bosch EDC16CP31 original files

The Bosch EDC16CP31 unit page