Original file

Jeep Grand Cherokee Bosch EDC16CP31 CR4C-642-45W1-WH-EUOP_155kW_V2_Dpf_EGS53_1408x022 / 1037396173

An original (stock) flash read of the Bosch EDC16CP31 control unit, fitted in Jeep Grand Cherokee, hardware number CR4C-642-45W1-WH-EUOP_155kW_V2_Dpf_EGS53_1408x022 and software number 1037396173, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jeep Grand Cherokee3.0 diesel 155KW
Control unit
Bosch EDC16CP31
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CR4C-642-45W1-WH-EUOP_155kW_V2_Dpf_EGS53_1408x022
Software number
1037396173

Technical data

Vehicle
BrandJeep
Car modelGrand Cherokee
Engine3.0 diesel 155KW
Control unit
Control unitBosch EDC16CP31
ECU makerBosch
Hardware numberCR4C-642-45W1-WH-EUOP_155kW_V2_Dpf_EGS53_1408x022
Software number1037396173
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key338c597fbbf10b13
Identification read from the file
ECU nameEDC16CP31
Read typeCalibration only (data set)
Bosch part / software1037396173Offset in the file: 0x190010
Bosch project identifier (EPK)99/1/EDC16CP31/001/B209Offset in the file: 0x1906FB

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR4C-642-45W1-WH-EUOP_155kW_V2_Dpf_EGS53_1408x022 and software number 1037396173. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16CP31

HardwareSoftwareVehicles
CR4C-642-45W1-WH-EU4O_160KW_V1_NON_DPF_EGS53_2607X0221037390917Chrysler Grand Cherokee, Chrysler Jeep Grand Cherokee, Jeep
CR4C-642-45W1-WH-EU4O_160KW_V2_NON_DPF_EGS53_1408X0231037396172Jeep Grand Cherokee, Jeep Grand Cherokee, Chrysler
CR4C-642-45W1-WH-EU4O_160kW_V2_non_Dpf_EGS53_1408x0231037396172Chrysler Jeep Grand Cherokee
CR4C-642-45W1-WH-EUOP_155KW_V1_DPF_EGS53_2607X0211037390916Jeep Grand Cherokee, Jeep Grand Cherokee, Chrysler
CR4C-642-45W1-WH_EUOP_160KW_V1_DPF_EGS53_2607X0211037390914Jeep Grand Cherokee
CR4C-642-45W1-WH_EUOP_160KW_V2_DPF_EGS53_1408X0221037396171Chrysler Jeep Grand Cherokee
CR4C-642-45W1-WH_EUOP_160kW_V1_DPF_EGS53_2607x0211037390914Chrysler Cherokee/Liberty, Chrysler Jeep Grand Cherokee
CR4C-642-45W1-WH_EUOP_160kW_V2_DPF_EGS53_1408x0221037396171Chrysler Grand Cherokee 3.0CRDI 2007, Chrysler Cherokee/Liberty, Jeep

Bosch EDC16CP31 original files

The Bosch EDC16CP31 unit page