Original file
Mercedes-Benz C Bosch EDC16CP31 CR6-642-56S0-204SA-165KW-EU4OP_4X4-006C_ME09 / 1037392633
An original (stock) flash read of the Bosch EDC16CP31 control unit, fitted in Mercedes-Benz C, hardware number CR6-642-56S0-204SA-165KW-EU4OP_4X4-006C_ME09 and software number 1037392633, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz Cdiesel 225PS
- Control unit
- Bosch EDC16CP31
- Read type
- OBD read (no boot area)
- File
- 2,048.00 KB · Flash
- Hardware number
- CR6-642-56S0-204SA-165KW-EU4OP_4X4-006C_ME09
- Software number
- 1037392633
- Bosch part / software
- 1037501657
- Software / calibration
- 6429024600
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | C |
| Engine | diesel 225PS |
| Power | 225.0PS / 165.5kW |
| Control unit | Bosch EDC16CP31 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR6-642-56S0-204SA-165KW-EU4OP_4X4-006C_ME09 |
| Software number | 1037392633 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | e3eed3be62181e0b |
| ECU name | EDC17CP01 | |
|---|---|---|
| Read type | OBD read (no boot area) | |
| Processor | TC1796 | |
| Bosch part / software | 1037501657 | Offset in the file: 0x04001A |
| Software / calibration | 6429024600 | Offset in the file: 0x02163A |
| Bosch project identifier (EPK) | 46/1/EDC17CP01/1/P448//P_448_6_6_0_CV091100/// | Offset in the file: 0x057670 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC16CP31 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR6-642-56S0-204SA-165KW-EU4OP_4X4-006C_ME09 and software number 1037392633. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC16CP31
| Hardware | Software | Vehicles |
|---|---|---|
| CR4_NFZ-OM642-PK-S007 | 1037393814 | Mercedes-Benz Vito, Mercedes-Benz Viano 300CDI |
| CR4_NFZ-OM642-PK-S008 | 1037386794 | Mercedes-Benz Sprinter |
| CR4_NFZ-OM642-PK-S013 | 1037391219 | Mercedes-Benz Vito |
| CR4_NFZ-OM642-PK-S018 | 1037386790 | Mercedes-Benz Vito |
| CR6NFZ-642-61N6-906A-CHARGE4_LSUOLA_3ZNW-140KW-NAFTA10_OPS-5 | 1037500231 | Mercedes-Benz Sprinter |
| CRA-OM640-PUBKEY-S007 | 1037500676 | Mercedes-Benz B |
| ECTCD84YVE4ARHD4A43 | 1037384666 | Chrysler Voyager |
| EJTCD94YVE6AAE9DA | 1037396188 | Chrysler Jeep Wrangler, Chrysler Grand Cherokee |