Original file

Chrysler Voyager Bosch EDC16CP31 ECTCD84YVE4ARHD4A43 / 1037384666

An original (stock) flash read of the Bosch EDC16CP31 control unit, fitted in Chrysler Voyager, hardware number ECTCD84YVE4ARHD4A43 and software number 1037384666, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Chrysler Voyager2.8 163PS
Control unit
Bosch EDC16CP31
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
ECTCD84YVE4ARHD4A43
Software number
1037384666

Technical data

Vehicle
BrandChrysler
Car modelVoyager
Engine2.8 163PS
FuelDiesel
Power163.0PS / 119.9kW
Control unit
Control unitBosch EDC16CP31
ECU makerBosch
Hardware numberECTCD84YVE4ARHD4A43
Software number1037384666
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyb51bee09c849733c
Identification read from the file
ECU nameEDC16CP31
Read typeCalibration only (data set)
Bosch part / software1037384666Offset in the file: 0x1C0010
Bosch project identifier (EPK)99/1/EDC16CP31/001/X538Offset in the file: 0x1C0486

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number ECTCD84YVE4ARHD4A43 and software number 1037384666. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16CP31

HardwareSoftwareVehicles
CR4_NFZ-OM642-PK-S0181037386790Mercedes-Benz Vito
CR6-642-56S0-204SA-165KW-EU4OP_4X4-006C_ME091037392633Mercedes-Benz C
CR6NFZ-642-61N6-906A-CHARGE4_LSUOLA_3ZNW-140KW-NAFTA10_OPS-51037500231Mercedes-Benz Sprinter
CRA-OM640-PUBKEY-S0071037500676Mercedes-Benz B
EJTCD94YVE6AAE9DA1037396188Chrysler Jeep Wrangler, Chrysler Grand Cherokee
F-1907X063M1037390824Mercedes-Benz CLS
GAC9977L1971037384693Jeep Wrangler
P20942P71037387863Mercedes-Benz CLS 320CDI 2008 Turbo

Bosch EDC16CP31 original files

The Bosch EDC16CP31 unit page