Original file

Mercedes-Benz CLS Bosch EDC16CP31 F-1907X063M / 1037390824

An original (stock) flash read of the Bosch EDC16CP31 control unit, fitted in Mercedes-Benz CLS, hardware number F-1907X063M and software number 1037390824, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz CLSdiesel · 211.0PS / 155.2kW
Control unit
Bosch EDC16CP31
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
F-1907X063M
Software number
1037390824

Technical data

Vehicle
BrandMercedes-Benz
Car modelCLS
Enginediesel
Power211.0PS / 155.2kW
Control unit
Control unitBosch EDC16CP31
ECU makerBosch
Hardware numberF-1907X063M
Software number1037390824
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keydbb2a6d7b5f1171b
Identification read from the file
ECU nameEDC16CP31
Read typeCalibration only (data set)
Bosch part / software1037390824Offset in the file: 0x190010
Bosch project identifier (EPK)99/1/EDC16CP31/001/B209Offset in the file: 0x1906F7

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number F-1907X063M and software number 1037390824. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16CP31

HardwareSoftwareVehicles
CR6NFZ-642-61N6-906A-CHARGE4_LSUOLA_3ZNW-140KW-NAFTA10_OPS-51037500231Mercedes-Benz Sprinter
CRA-OM640-PUBKEY-S0071037500676Mercedes-Benz B
ECTCD84YVE4ARHD4A431037384666Chrysler Voyager
EJTCD94YVE6AAE9DA1037396188Chrysler Jeep Wrangler, Chrysler Grand Cherokee
GAC9977L1971037384693Jeep Wrangler
P20942P71037387863Mercedes-Benz CLS 320CDI 2008 Turbo
P_5386001037396550Chrysler Voyager, Chrysler Grand
R-1907X063M1037390823Mercedes-Benz CLS 320 2007 Turbodiesel

Bosch EDC16CP31 original files

The Bosch EDC16CP31 unit page