Original file

Nissan X Trail Bosch EDC16CP33 0281013874 / 1037389647

An original (stock) flash read of the Bosch EDC16CP33 control unit, fitted in Nissan X Trail, hardware number 0281013874 and software number 1037389647, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Nissan X Trail2.0 diesel
Control unit
Bosch EDC16CP33
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
0281013874
Software number
1037389647
Bosch part / software
1037387003

Technical data

Vehicle
BrandNissan
Car modelX Trail
Engine2.0 diesel
Control unit
Control unitBosch EDC16CP33
ECU makerBosch
Hardware number0281013874
Software number1037389647
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameNissan Trail EDC16CP33
File key07364cea3709b8a1
Identification read from the file
ECU nameEDC16CP33
Read typeFull read (boot area included)
ProcessorMPC561
Bosch part / software1037387003Offset in the file: 0x040010
Bosch project identifier (EPK)99/1/EDC16CP33/015/C576Offset in the file: 0x1B039E

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP33 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281013874 and software number 1037389647. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16CP33

HardwareSoftwareVehicles
01105367991037536799Renault Koleos
01105378061037537806Nissan Qashqai
02810126591037379644Renault Megane 2
02810138551037387004Nissan Qashqai
02810138741037394042Nissan X-Trail
02810143601037393635Renault Koleos
02810143611037394501Nissan Qashqai
02810146481037390530Opel Vivaro, Opel Primastar 2,0DCI M9R, Opel Vivaro 2010y 2.0L

Bosch EDC16CP33 original files

The Bosch EDC16CP33 unit page