Original file

Nissan X-Trail Bosch EDC16CP33 3G0906259 / 1037535020

An original (stock) flash read of the Bosch EDC16CP33 control unit, fitted in Nissan X-Trail, hardware number 3G0906259 and software number 1037535020, 320.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Nissan X-Trail2.0 diesel 150PS
Control unit
Bosch EDC16CP33
Read type
Calibration only (data set)
File
320.00 KB · Flash
Hardware number
3G0906259
Software number
1037535020

Technical data

Vehicle
BrandNissan
Car modelX-Trail
Engine2.0 diesel 150PS
Power150.0PS / 110.3kW
Control unit
Control unitBosch EDC16CP33
ECU makerBosch
Hardware number3G0906259
Software number1037535020
File
File typeOriginal flash read
File size320.00 KB (327,680 bytes)
File keyf8403018a81fdf22
Identification read from the file
ECU nameEDC16CP33
Read typeCalibration only (data set)
Bosch part / software1037535020Offset in the file: 0x000010
Bosch project identifier (EPK)99/1/EDC16CP33/015/C576Offset in the file: 0x0003A2

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP33 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 3G0906259 and software number 1037535020. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16CP33

HardwareSoftwareVehicles
31264781037389608Nissan X-Trail
31264781037516229Nissan X-Trail
31264781037516233Nissan Qashqai
31264781037535000Nissan Qashqai
6389454471037387382Renault Espace
82000000011037387003Nissan X trail 2.0DCI
82000000011037389612Nissan X-Trail
82000000011037389647Nissan X-Trail

Bosch EDC16CP33 original files

The Bosch EDC16CP33 unit page