Original file

Renault Espace Bosch EDC16CP33 8200666472 / 1037379644

An original (stock) flash read of the Bosch EDC16CP33 control unit, fitted in Renault Espace, hardware number 8200666472 and software number 1037379644, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Renault Espace2.0 diesel 150PS
Control unit
Bosch EDC16CP33
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
8200666472
Software number
1037379644

Technical data

Vehicle
BrandRenault
Car modelEspace
Engine2.0 diesel 150PS
Power150.0PS / 110.3kW
Control unit
Control unitBosch EDC16CP33
ECU makerBosch
Hardware number8200666472
Software number1037379644
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key4e7a0bbaaff878b1
Identification read from the file
ECU nameEDC16CP33
Read typeFull read (boot area included)
ProcessorMPC561
Bosch part / software1037379644Offset in the file: 0x040010
Bosch project identifier (EPK)99/1/EDC16CP33/015/C344Offset in the file: 0x1C033A

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP33 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8200666472 and software number 1037379644. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16CP33

HardwareSoftwareVehicles
82006621031037379646Renault Megane II, Renault Megane 3
82006621051037381335Renault Megane II
82006621091037377546Renault Megane II
82006621091037379655Renault Scenic, Renault Scenic / Grand Scenic
82006665161037382400Opel Vivaro
82006665161037388188Opel Vivaro
82006665161037388189Nissan PRIMASTAR
82006665161037388191Renault Traffic II

Bosch EDC16CP33 original files

The Bosch EDC16CP33 unit page